BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277898BTC
Na zalogi
A-Tech
A-Tech 16GB DDR4 2133MHz ECC SODIMM CL15 1.2V 260-Pin HP 835886-001/002
16 GB DDR4 ECC SODIMM at 2133 MHz CL15 for HP 835886-001 and 835886-002 microservers
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 16 GB capacity supports larger workloads and smoother multitasking
- DDR4 2133 MHz speed delivers PC4-17000 bandwidth for responsive performance
- ECC unbuffered design detects and corrects single-bit errors automatically
- 2 V standard voltage keeps power draw low and thermals manageable
- 260-pin SODIMM form factor matches HP 835886-001 and 835886-002 specifications
16GB DDR4 ECC SODIMM
This module delivers 16GB of DDR4 ECC memory at 2133MHz with CL15 latency and 1.2V operation. It uses a 260-pin SO-DIMM form factor and is built as an unbuffered ECC replacement for HP part numbers 835886-001 and 835886-002. The 2Rx8 organisation supports error correction for data integrity.
Microserver and workstation upgrades
It suits administrators adding capacity to compatible HP MicroServer or workstation platforms that require ECC SO-DIMM memory. Builders of standard consumer laptops or desktops without ECC support should look elsewhere, as the error-correction feature will not function on non-ECC platforms.
Capacity for virtualised workloads
The 16GB density provides headroom for running multiple virtual machines or memory-heavy services on supported microserver hardware. Systems limited to lower maximum memory per slot or those requiring registered DIMMs will not be able to use this module.
Poudarki
- 16 GB capacity supports larger workloads and smoother multitasking
- DDR4 2133 MHz speed delivers PC4-17000 bandwidth for responsive performance
- ECC unbuffered design detects and corrects single-bit errors automatically
- 2 V standard voltage keeps power draw low and thermals manageable
- 260-pin SODIMM form factor matches HP 835886-001 and 835886-002 specifications
Specifikacije
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 835886-001, 835886-002 |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | 835886-001, 835886-002 |
| Recommend Use | Compatible Replacement for HP 835886-001, 835886-002 |
Vprašanja o tem izdelku
Does my laptop need an open 260-pin DDR4 SO-DIMM slot to install this 16GB module?
Yes, the module uses the standard 260-pin DDR4 SO-DIMM form factor and requires a free DDR4 SO-DIMM slot that supports ECC unbuffered memory.
Will this ECC SODIMM work in a system that currently runs non-ECC DDR4 2133MHz memory?
The module is ECC unbuffered; it will only function if the platform's memory controller and BIOS explicitly support ECC, otherwise the system may not boot or will disable ECC.
How can I confirm the module is running at DDR4 2133MHz CL15 with ECC active after installation?
Check the memory speed, CAS latency and ECC status in the BIOS/UEFI memory information screen or use a system-information utility that reports DRAM frequency, timings and ECC mode.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
