暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 16GB DDR4 2133MHz ECC SODIMM CL15 1.2V 260-Pin HP 835886-001/002

SKU CH-K7K5-VCJJ0

16 GB DDR4 ECC SODIMM at 2133 MHz CL15 for HP 835886-001 and 835886-002 microservers

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB capacity supports larger workloads and smoother multitasking
  • DDR4 2133 MHz speed delivers PC4-17000 bandwidth for responsive performance
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V standard voltage keeps power draw low and thermals manageable
  • 260-pin SODIMM form factor matches HP 835886-001 and 835886-002 specifications

16GB DDR4 ECC SODIMM

This module delivers 16GB of DDR4 ECC memory at 2133MHz with CL15 latency and 1.2V operation. It uses a 260-pin SO-DIMM form factor and is built as an unbuffered ECC replacement for HP part numbers 835886-001 and 835886-002. The 2Rx8 organisation supports error correction for data integrity.

Microserver and workstation upgrades

It suits administrators adding capacity to compatible HP MicroServer or workstation platforms that require ECC SO-DIMM memory. Builders of standard consumer laptops or desktops without ECC support should look elsewhere, as the error-correction feature will not function on non-ECC platforms.

Capacity for virtualised workloads

The 16GB density provides headroom for running multiple virtual machines or memory-heavy services on supported microserver hardware. Systems limited to lower maximum memory per slot or those requiring registered DIMMs will not be able to use this module.

特長

  • 16 GB capacity supports larger workloads and smoother multitasking
  • DDR4 2133 MHz speed delivers PC4-17000 bandwidth for responsive performance
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V standard voltage keeps power draw low and thermals manageable
  • 260-pin SODIMM form factor matches HP 835886-001 and 835886-002 specifications

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
Model835886-001, 835886-002
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Features835886-001, 835886-002
Recommend UseCompatible Replacement for HP 835886-001, 835886-002

この商品に関する質問

Does my laptop need an open 260-pin DDR4 SO-DIMM slot to install this 16GB module?

Yes, the module uses the standard 260-pin DDR4 SO-DIMM form factor and requires a free DDR4 SO-DIMM slot that supports ECC unbuffered memory.

Will this ECC SODIMM work in a system that currently runs non-ECC DDR4 2133MHz memory?

The module is ECC unbuffered; it will only function if the platform's memory controller and BIOS explicitly support ECC, otherwise the system may not boot or will disable ECC.

How can I confirm the module is running at DDR4 2133MHz CL15 with ECC active after installation?

Check the memory speed, CAS latency and ECC status in the BIOS/UEFI memory information screen or use a system-information utility that reports DRAM frequency, timings and ECC mode.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。