نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 16GB DDR4 2133MHz ECC SODIMM CL15 1.2V 260-Pin HP 835886-001/002

SKU CH-K7K5-VCJJ0

16 GB DDR4 ECC SODIMM at 2133 MHz CL15 for HP 835886-001 and 835886-002 microservers

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB capacity supports larger workloads and smoother multitasking
  • DDR4 2133 MHz speed delivers PC4-17000 bandwidth for responsive performance
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V standard voltage keeps power draw low and thermals manageable
  • 260-pin SODIMM form factor matches HP 835886-001 and 835886-002 specifications

16GB DDR4 ECC SODIMM

This module delivers 16GB of DDR4 ECC memory at 2133MHz with CL15 latency and 1.2V operation. It uses a 260-pin SO-DIMM form factor and is built as an unbuffered ECC replacement for HP part numbers 835886-001 and 835886-002. The 2Rx8 organisation supports error correction for data integrity.

Microserver and workstation upgrades

It suits administrators adding capacity to compatible HP MicroServer or workstation platforms that require ECC SO-DIMM memory. Builders of standard consumer laptops or desktops without ECC support should look elsewhere, as the error-correction feature will not function on non-ECC platforms.

Capacity for virtualised workloads

The 16GB density provides headroom for running multiple virtual machines or memory-heavy services on supported microserver hardware. Systems limited to lower maximum memory per slot or those requiring registered DIMMs will not be able to use this module.

أبرز المميزات

  • 16 GB capacity supports larger workloads and smoother multitasking
  • DDR4 2133 MHz speed delivers PC4-17000 bandwidth for responsive performance
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V standard voltage keeps power draw low and thermals manageable
  • 260-pin SODIMM form factor matches HP 835886-001 and 835886-002 specifications

المواصفات

BrandA-Tech
SeriesCompatible Replacement for HP
Model835886-001, 835886-002
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Features835886-001, 835886-002
Recommend UseCompatible Replacement for HP 835886-001, 835886-002

أسئلة حول هذا المنتج

Does my laptop need an open 260-pin DDR4 SO-DIMM slot to install this 16GB module?

Yes, the module uses the standard 260-pin DDR4 SO-DIMM form factor and requires a free DDR4 SO-DIMM slot that supports ECC unbuffered memory.

Will this ECC SODIMM work in a system that currently runs non-ECC DDR4 2133MHz memory?

The module is ECC unbuffered; it will only function if the platform's memory controller and BIOS explicitly support ECC, otherwise the system may not boot or will disable ECC.

How can I confirm the module is running at DDR4 2133MHz CL15 with ECC active after installation?

Check the memory speed, CAS latency and ECC status in the BIOS/UEFI memory information screen or use a system-information utility that reports DRAM frequency, timings and ECC mode.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.