BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
A-Tech
8GB DDR3 1600MHz SODIMM laptop memory with CL11 timing and 1.5V operation
This A-Tech module supplies 8GB of DDR3 memory at 1600MHz with CL11 latency. It is built as a single 204-pin SO-DIMM running at 1.5V for notebook and all-in-one systems. The stick is unbuffered and non-ECC, matching the standard DDR3 voltage used by many Intel and AMD platforms. Buyers who need more than 8GB of capacity should check their chassis for additional slots before ordering.
The module uses major-brand components on a standard SO-DIMM PCB that slots directly into the laptop memory socket. Its 204-pin edge connector aligns with the DDR3 key notch, so installation requires no adapters or cables. The 2Rx8 organisation fits the electrical layout expected by the listed Lenovo part numbers 03T6458, 03X6562, 0A65724 and 0B46410. Systems limited to a single memory slot cannot expand beyond this one module.
Running at the JEDEC 1.5V specification, the stick draws only the power defined for DDR3 1600 without over-voltage headroom. Passive cooling from the laptop chassis is sufficient because the module has no active fan or heatsink. Low voltage and unbuffered signalling help keep acoustic output at zero during typical workloads. Builders targeting ultra-low-power or fanless designs should verify their platform supports 1.5V DDR3 before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module operates at 1600 MHz with a PC3-12800 data rate and CL11 latency, delivering the rated DDR3 bandwidth your notebook's memory controller negotiates.
It requires a standard DDR3 SO-DIMM socket with the 204-pin key notch; the gold-edge connector and module height match the laptop form factor used by the listed IBM-Lenovo part numbers.
Power off, unplug, remove the battery if accessible, open the memory door, align the notch, insert at an angle, then press down firmly until both side clips click — skipping the firm press leaves the module loose and unrecognised.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?