BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
8GB DDR3 1600MHz SODIMM laptop memory with CL11 timing and 1.5V operation
This A-Tech module supplies 8GB of DDR3 memory at 1600MHz with CL11 latency. It is built as a single 204-pin SO-DIMM running at 1.5V for notebook and all-in-one systems. The stick is unbuffered and non-ECC, matching the standard DDR3 voltage used by many Intel and AMD platforms. Buyers who need more than 8GB of capacity should check their chassis for additional slots before ordering.
The module uses major-brand components on a standard SO-DIMM PCB that slots directly into the laptop memory socket. Its 204-pin edge connector aligns with the DDR3 key notch, so installation requires no adapters or cables. The 2Rx8 organisation fits the electrical layout expected by the listed Lenovo part numbers 03T6458, 03X6562, 0A65724 and 0B46410. Systems limited to a single memory slot cannot expand beyond this one module.
Running at the JEDEC 1.5V specification, the stick draws only the power defined for DDR3 1600 without over-voltage headroom. Passive cooling from the laptop chassis is sufficient because the module has no active fan or heatsink. Low voltage and unbuffered signalling help keep acoustic output at zero during typical workloads. Builders targeting ultra-low-power or fanless designs should verify their platform supports 1.5V DDR3 before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module operates at 1600 MHz with a PC3-12800 data rate and CL11 latency, delivering the rated DDR3 bandwidth your notebook's memory controller negotiates.
It requires a standard DDR3 SO-DIMM socket with the 204-pin key notch; the gold-edge connector and module height match the laptop form factor used by the listed IBM-Lenovo part numbers.
Power off, unplug, remove the battery if accessible, open the memory door, align the notch, insert at an angle, then press down firmly until both side clips click — skipping the firm press leaves the module loose and unrecognised.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?