BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8GB DDR3 1600MHz SODIMM laptop memory with CL11 timing and 1.5V operation
This A-Tech module supplies 8GB of DDR3 memory at 1600MHz with CL11 latency. It is built as a single 204-pin SO-DIMM running at 1.5V for notebook and all-in-one systems. The stick is unbuffered and non-ECC, matching the standard DDR3 voltage used by many Intel and AMD platforms. Buyers who need more than 8GB of capacity should check their chassis for additional slots before ordering.
The module uses major-brand components on a standard SO-DIMM PCB that slots directly into the laptop memory socket. Its 204-pin edge connector aligns with the DDR3 key notch, so installation requires no adapters or cables. The 2Rx8 organisation fits the electrical layout expected by the listed Lenovo part numbers 03T6458, 03X6562, 0A65724 and 0B46410. Systems limited to a single memory slot cannot expand beyond this one module.
Running at the JEDEC 1.5V specification, the stick draws only the power defined for DDR3 1600 without over-voltage headroom. Passive cooling from the laptop chassis is sufficient because the module has no active fan or heatsink. Low voltage and unbuffered signalling help keep acoustic output at zero during typical workloads. Builders targeting ultra-low-power or fanless designs should verify their platform supports 1.5V DDR3 before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module operates at 1600 MHz with a PC3-12800 data rate and CL11 latency, delivering the rated DDR3 bandwidth your notebook's memory controller negotiates.
It requires a standard DDR3 SO-DIMM socket with the 204-pin key notch; the gold-edge connector and module height match the laptop form factor used by the listed IBM-Lenovo part numbers.
Power off, unplug, remove the battery if accessible, open the memory door, align the notch, insert at an angle, then press down firmly until both side clips click — skipping the firm press leaves the module loose and unrecognised.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟