BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
A-Tech
8GB DDR4 2133MHz CL15 260-pin SODIMM laptop memory module compatible with HP part numbers 799087-971, 820569-005 and T0H90AA
This is an A-Tech 8GB DDR4 2133MHz CL15 260-pin SODIMM module designed as a compatible replacement for HP part numbers 799087-971, 820569-005 and T0H90AA. It operates at 1.20V with unbuffered, non-ECC architecture using major brand chips. The module suits laptop, notebook and all-in-one systems requiring this specific speed and form factor.
This module suits owners of compatible HP systems needing an 8GB DDR4 2133MHz upgrade to improve multitasking and responsiveness. It is not for buyers whose laptops require a different DDR generation, a different pin count, ECC or registered memory, or a voltage other than 1.20V. Systems limited to lower maximum capacities or different form factors cannot use this module.
The single specification that determines fit is the DDR4 2133MHz 260-pin SODIMM interface with CL15 latency at 1.20V. Your system must accept DDR4 SO-DIMM modules at this exact speed and pin configuration; a different generation, speed grade or form factor will not install or function. Verify your device documentation for this precise memory type before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click — the step most people miss is pressing evenly on both ends until the clips engage fully.
No routine maintenance is required; keep the laptop vents clean to avoid overheating the 1.20V memory, and replace the module only if memory errors appear or you need more than 8GB capacity.
The 2133MHz speed and CL15 latency set the throughput ceiling; under sustained load the memory controller will hit that bandwidth limit before the 1.20V voltage or thermal envelope becomes a bottleneck.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?