BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
A-Tech
8GB DDR4 2133MHz CL15 260-pin SODIMM laptop memory module compatible with HP part numbers 799087-971, 820569-005 and T0H90AA
This is an A-Tech 8GB DDR4 2133MHz CL15 260-pin SODIMM module designed as a compatible replacement for HP part numbers 799087-971, 820569-005 and T0H90AA. It operates at 1.20V with unbuffered, non-ECC architecture using major brand chips. The module suits laptop, notebook and all-in-one systems requiring this specific speed and form factor.
This module suits owners of compatible HP systems needing an 8GB DDR4 2133MHz upgrade to improve multitasking and responsiveness. It is not for buyers whose laptops require a different DDR generation, a different pin count, ECC or registered memory, or a voltage other than 1.20V. Systems limited to lower maximum capacities or different form factors cannot use this module.
The single specification that determines fit is the DDR4 2133MHz 260-pin SODIMM interface with CL15 latency at 1.20V. Your system must accept DDR4 SO-DIMM modules at this exact speed and pin configuration; a different generation, speed grade or form factor will not install or function. Verify your device documentation for this precise memory type before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click — the step most people miss is pressing evenly on both ends until the clips engage fully.
No routine maintenance is required; keep the laptop vents clean to avoid overheating the 1.20V memory, and replace the module only if memory errors appear or you need more than 8GB capacity.
The 2133MHz speed and CL15 latency set the throughput ceiling; under sustained load the memory controller will hit that bandwidth limit before the 1.20V voltage or thermal envelope becomes a bottleneck.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?