BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
8GB DDR4 2133MHz CL15 260-pin SODIMM laptop memory module compatible with HP part numbers 799087-971, 820569-005 and T0H90AA
This is an A-Tech 8GB DDR4 2133MHz CL15 260-pin SODIMM module designed as a compatible replacement for HP part numbers 799087-971, 820569-005 and T0H90AA. It operates at 1.20V with unbuffered, non-ECC architecture using major brand chips. The module suits laptop, notebook and all-in-one systems requiring this specific speed and form factor.
This module suits owners of compatible HP systems needing an 8GB DDR4 2133MHz upgrade to improve multitasking and responsiveness. It is not for buyers whose laptops require a different DDR generation, a different pin count, ECC or registered memory, or a voltage other than 1.20V. Systems limited to lower maximum capacities or different form factors cannot use this module.
The single specification that determines fit is the DDR4 2133MHz 260-pin SODIMM interface with CL15 latency at 1.20V. Your system must accept DDR4 SO-DIMM modules at this exact speed and pin configuration; a different generation, speed grade or form factor will not install or function. Verify your device documentation for this precise memory type before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click — the step most people miss is pressing evenly on both ends until the clips engage fully.
No routine maintenance is required; keep the laptop vents clean to avoid overheating the 1.20V memory, and replace the module only if memory errors appear or you need more than 8GB capacity.
The 2133MHz speed and CL15 latency set the throughput ceiling; under sustained load the memory controller will hit that bandwidth limit before the 1.20V voltage or thermal envelope becomes a bottleneck.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?