A-Tech
A-Tech Supermicro Certified 16GB DDR4 3200MHz CL22 ECC Registered 2Rx8 288-Pin Server RAM
16 GB DDR4 3200 MHz ECC registered server memory with CL22 latency and 2Rx8 dual-rank organisation
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- Supermicro certified for guaranteed server compatibility
- 16GB DDR4 3200MHz CL22 boosts multitasking throughput
- ECC registered 2Rx8 design protects data integrity
- Hynix major-brand chips ensure dependable operation
- 2V standard voltage reduces power draw
Supermicro Certified Server Memory
This 16GB DDR4 module carries Supermicro certification and is built for servers and workstations that require registered ECC memory. It suits administrators expanding capacity in qualified Supermicro platforms or replacing failed DIMMs with a validated part.
Registered ECC RDIMM with 288-pin interface
The module uses a registered design that places a register between the DRAM and the memory controller, reducing electrical load on the bus. Its 288-pin RDIMM form factor fits standard DDR4 server slots, and the dual-rank 2Rx8 organisation supports higher densities per channel.
3200MHz CL22 at 1.20V decides fit
The DIMM runs at PC4-25600 speed with a CAS latency of 22 and operates at the standard 1.20V DDR4 voltage. Systems must support DDR4 3200 registered ECC memory at this latency; platforms limited to lower speeds or unbuffered DIMMs cannot use this module.
Poudarki
- Supermicro certified for guaranteed server compatibility
- 16GB DDR4 3200MHz CL22 boosts multitasking throughput
- ECC registered 2Rx8 design protects data integrity
- Hynix major-brand chips ensure dependable operation
- 2V standard voltage reduces power draw
Specifikacije
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR416LD-ER32 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Supermicro Certified MEM-DR416LD-ER32 (HMA82GR7CJR8N-XN) |
Vprašanja o tem izdelku
What speed and form factor does this DDR4 RDIMM use?
The module runs at 3200 MHz as PC4-25600 in a 288-pin RDIMM form factor with CL22 latency and 1.20 V operation.
What physical slot and keying does this 288-pin RDIMM require?
It fits a standard DDR4 288-pin RDIMM slot; the registered design and ECC function only work on platforms that support registered ECC memory.
How is the module installed and what step is often missed?
Power down the server, open the chassis, align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are active.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



