Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech Supermicro Certified 16GB DDR4 3200MHz CL22 ECC Registered 2Rx8 288-Pin Server RAM

SKU CH-4H2T-X1DNP

16 GB DDR4 3200 MHz ECC registered server memory with CL22 latency and 2Rx8 dual-rank organisation

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 16GB DDR4 3200MHz CL22 boosts multitasking throughput
  • ECC registered 2Rx8 design protects data integrity
  • Hynix major-brand chips ensure dependable operation
  • 2V standard voltage reduces power draw

Supermicro Certified Server Memory

This 16GB DDR4 module carries Supermicro certification and is built for servers and workstations that require registered ECC memory. It suits administrators expanding capacity in qualified Supermicro platforms or replacing failed DIMMs with a validated part.

Registered ECC RDIMM with 288-pin interface

The module uses a registered design that places a register between the DRAM and the memory controller, reducing electrical load on the bus. Its 288-pin RDIMM form factor fits standard DDR4 server slots, and the dual-rank 2Rx8 organisation supports higher densities per channel.

3200MHz CL22 at 1.20V decides fit

The DIMM runs at PC4-25600 speed with a CAS latency of 22 and operates at the standard 1.20V DDR4 voltage. Systems must support DDR4 3200 registered ECC memory at this latency; platforms limited to lower speeds or unbuffered DIMMs cannot use this module.

Přednosti

  • Supermicro certified for guaranteed server compatibility
  • 16GB DDR4 3200MHz CL22 boosts multitasking throughput
  • ECC registered 2Rx8 design protects data integrity
  • Hynix major-brand chips ensure dependable operation
  • 2V standard voltage reduces power draw

Specifikace

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416LD-ER32
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR416LD-ER32 (HMA82GR7CJR8N-XN)

Otázky k tomuto produktu

What speed and form factor does this DDR4 RDIMM use?

The module runs at 3200 MHz as PC4-25600 in a 288-pin RDIMM form factor with CL22 latency and 1.20 V operation.

What physical slot and keying does this 288-pin RDIMM require?

It fits a standard DDR4 288-pin RDIMM slot; the registered design and ECC function only work on platforms that support registered ECC memory.

How is the module installed and what step is often missed?

Power down the server, open the chassis, align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.