We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech Supermicro Certified 16GB DDR4 3200MHz CL22 ECC Registered 2Rx8 288-Pin Server RAM

SKU CH-4H2T-X1DNP

16 GB DDR4 3200 MHz ECC registered server memory with CL22 latency and 2Rx8 dual-rank organisation

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 16GB DDR4 3200MHz CL22 boosts multitasking throughput
  • ECC registered 2Rx8 design protects data integrity
  • Hynix major-brand chips ensure dependable operation
  • 2V standard voltage reduces power draw

Supermicro Certified Server Memory

This 16GB DDR4 module carries Supermicro certification and is built for servers and workstations that require registered ECC memory. It suits administrators expanding capacity in qualified Supermicro platforms or replacing failed DIMMs with a validated part.

Registered ECC RDIMM with 288-pin interface

The module uses a registered design that places a register between the DRAM and the memory controller, reducing electrical load on the bus. Its 288-pin RDIMM form factor fits standard DDR4 server slots, and the dual-rank 2Rx8 organisation supports higher densities per channel.

3200MHz CL22 at 1.20V decides fit

The DIMM runs at PC4-25600 speed with a CAS latency of 22 and operates at the standard 1.20V DDR4 voltage. Systems must support DDR4 3200 registered ECC memory at this latency; platforms limited to lower speeds or unbuffered DIMMs cannot use this module.

Highlights

  • Supermicro certified for guaranteed server compatibility
  • 16GB DDR4 3200MHz CL22 boosts multitasking throughput
  • ECC registered 2Rx8 design protects data integrity
  • Hynix major-brand chips ensure dependable operation
  • 2V standard voltage reduces power draw

Specifications

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416LD-ER32
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR416LD-ER32 (HMA82GR7CJR8N-XN)

Questions about this item

What speed and form factor does this DDR4 RDIMM use?

The module runs at 3200 MHz as PC4-25600 in a 288-pin RDIMM form factor with CL22 latency and 1.20 V operation.

What physical slot and keying does this 288-pin RDIMM require?

It fits a standard DDR4 288-pin RDIMM slot; the registered design and ECC function only work on platforms that support registered ECC memory.

How is the module installed and what step is often missed?

Power down the server, open the chassis, align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.