Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Five-tier metal filament rack on wheels, matte steel finish, holds 40 spools

BFKK

BFKK 5-Tier Filament Storage Rack 100 lb per tier 40 spools 3d printers accessory

SKU CH-XVNV-SBT6Q

Holds over 40 filament spools across five steel tiers rated at 100 lb each with wheels and levelling feet

  • Holds over 40 spools on five tiers
  • Each shelf supports up to 100 lb without bending
  • Removable bottom panel stores prints and accessories
  • Wheels and adjustable feet keep it stable on uneven floors
  • Assembles in about 20 minutes or 10 with a power drill

Five-Tier Filament Rack

This metal rack stores up to 40 standard 1 kg spools across five levels. Each tier supports 100 lb without bending. The open design lets you see every colour at once and pull the roll you need without digging through a cabinet. It suits busy print farms, makerspaces or hobbyists who run multiple materials daily.

Quick Assembly With Basic Tools

The supplier states the frame goes together in about 20 minutes using the included hardware, or roughly 10 minutes with a power drill. Thicker screws are provided for extra rigidity. Adjustable rubber feet level the unit on uneven floors, while lockable casters let you roll it into position and keep it steady during prints.

Check Floor Space And Spool Dimensions

Measure the available footprint before ordering; the rack needs room for five vertical tiers plus caster clearance. Confirm your spools are standard 1 kg size so nine fit per shelf. The bottom removable panel holds prints or tools, but verify it accommodates the items you plan to store. Buyers needing enclosed, dust-proof storage or a smaller desktop holder should look elsewhere.

Poudarki

  • Holds over 40 spools on five tiers
  • Each shelf supports up to 100 lb without bending
  • Removable bottom panel stores prints and accessories
  • Wheels and adjustable feet keep it stable on uneven floors
  • Assembles in about 20 minutes or 10 with a power drill

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How can I confirm the rack is stable after assembly?

The adjustable rubber leveling feet should sit flat on the floor with no wobble, and each loaded tier must remain level without bending under the 100 lb per shelf rating.

What comes in the box and what must I supply?

The package includes the steel frame, five shelves, removable bottom panel, wheels, leveling feet and thicker screws; you need a drill or screwdriver for the 10 to 20 minute build.

Should I choose the 5-tier model for 40 spools or a smaller unit?

Each tier holds up to 9 standard 1 kg spools, so the 5-tier version stores over 40 rolls at once — pick it when you need that full capacity in one footprint.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.