暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Five-tier metal filament rack on wheels, matte steel finish, holds 40 spools

BFKK

BFKK 5-Tier Filament Storage Rack 100 lb per tier 40 spools 3d printers accessory

SKU CH-XVNV-SBT6Q

Holds over 40 filament spools across five steel tiers rated at 100 lb each with wheels and levelling feet

  • Holds over 40 spools on five tiers
  • Each shelf supports up to 100 lb without bending
  • Removable bottom panel stores prints and accessories
  • Wheels and adjustable feet keep it stable on uneven floors
  • Assembles in about 20 minutes or 10 with a power drill

Five-Tier Filament Rack

This metal rack stores up to 40 standard 1 kg spools across five levels. Each tier supports 100 lb without bending. The open design lets you see every colour at once and pull the roll you need without digging through a cabinet. It suits busy print farms, makerspaces or hobbyists who run multiple materials daily.

Quick Assembly With Basic Tools

The supplier states the frame goes together in about 20 minutes using the included hardware, or roughly 10 minutes with a power drill. Thicker screws are provided for extra rigidity. Adjustable rubber feet level the unit on uneven floors, while lockable casters let you roll it into position and keep it steady during prints.

Check Floor Space And Spool Dimensions

Measure the available footprint before ordering; the rack needs room for five vertical tiers plus caster clearance. Confirm your spools are standard 1 kg size so nine fit per shelf. The bottom removable panel holds prints or tools, but verify it accommodates the items you plan to store. Buyers needing enclosed, dust-proof storage or a smaller desktop holder should look elsewhere.

特長

  • Holds over 40 spools on five tiers
  • Each shelf supports up to 100 lb without bending
  • Removable bottom panel stores prints and accessories
  • Wheels and adjustable feet keep it stable on uneven floors
  • Assembles in about 20 minutes or 10 with a power drill

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How can I confirm the rack is stable after assembly?

The adjustable rubber leveling feet should sit flat on the floor with no wobble, and each loaded tier must remain level without bending under the 100 lb per shelf rating.

What comes in the box and what must I supply?

The package includes the steel frame, five shelves, removable bottom panel, wheels, leveling feet and thicker screws; you need a drill or screwdriver for the 10 to 20 minute build.

Should I choose the 5-tier model for 40 spools or a smaller unit?

Each tier holds up to 9 standard 1 kg spools, so the 5-tier version stores over 40 rolls at once — pick it when you need that full capacity in one footprint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。