저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Five-tier metal filament rack on wheels, matte steel finish, holds 40 spools

BFKK

BFKK 5-Tier Filament Storage Rack 100 lb per tier 40 spools 3d printers accessory

SKU CH-XVNV-SBT6Q

Holds over 40 filament spools across five steel tiers rated at 100 lb each with wheels and levelling feet

  • Holds over 40 spools on five tiers
  • Each shelf supports up to 100 lb without bending
  • Removable bottom panel stores prints and accessories
  • Wheels and adjustable feet keep it stable on uneven floors
  • Assembles in about 20 minutes or 10 with a power drill

Five-Tier Filament Rack

This metal rack stores up to 40 standard 1 kg spools across five levels. Each tier supports 100 lb without bending. The open design lets you see every colour at once and pull the roll you need without digging through a cabinet. It suits busy print farms, makerspaces or hobbyists who run multiple materials daily.

Quick Assembly With Basic Tools

The supplier states the frame goes together in about 20 minutes using the included hardware, or roughly 10 minutes with a power drill. Thicker screws are provided for extra rigidity. Adjustable rubber feet level the unit on uneven floors, while lockable casters let you roll it into position and keep it steady during prints.

Check Floor Space And Spool Dimensions

Measure the available footprint before ordering; the rack needs room for five vertical tiers plus caster clearance. Confirm your spools are standard 1 kg size so nine fit per shelf. The bottom removable panel holds prints or tools, but verify it accommodates the items you plan to store. Buyers needing enclosed, dust-proof storage or a smaller desktop holder should look elsewhere.

주요 특징

  • Holds over 40 spools on five tiers
  • Each shelf supports up to 100 lb without bending
  • Removable bottom panel stores prints and accessories
  • Wheels and adjustable feet keep it stable on uneven floors
  • Assembles in about 20 minutes or 10 with a power drill

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

How can I confirm the rack is stable after assembly?

The adjustable rubber leveling feet should sit flat on the floor with no wobble, and each loaded tier must remain level without bending under the 100 lb per shelf rating.

What comes in the box and what must I supply?

The package includes the steel frame, five shelves, removable bottom panel, wheels, leveling feet and thicker screws; you need a drill or screwdriver for the 10 to 20 minute build.

Should I choose the 5-tier model for 40 spools or a smaller unit?

Each tier holds up to 9 standard 1 kg spools, so the 5-tier version stores over 40 rolls at once — pick it when you need that full capacity in one footprint.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.