Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
HPE 3TB 3.5 inch SATA hard drive with Smart Carrier tray attached

HPE

HPE 628061-B21 3TB 7200 RPM SATA 6.0Gb/s 3.5" LFF internal hard drive with Smart Carrier

SKU CH-CMZZ-7G2B0

3.5-inch SATA 6.0Gb/s 3TB hard drive spinning at 7200 RPM with hot-swap Smart Carrier for HPE ProLiant servers

  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 3 TB capacity for large-scale storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for high-throughput transfers
  • 5-inch LFF form factor fits standard drive bays
  • Smart Carrier enables tool-less hot-swap installation

3TB SATA Hard Drive for Servers

This HPE 3.5-inch LFF hard drive delivers 3TB of storage over a SATA 6.0Gb/s interface at 7200 RPM. It ships with a Smart Carrier tray attached for hot-swap installation in compatible bays. The drive is designed for non mission-critical server applications and storage environments where high capacity and reliability are required. It targets workloads of 40% or less.

SATA 6.0Gb/s Interface Limits

The SATA 6.0Gb/s link caps sequential throughput at the interface ceiling, so sustained rates cannot exceed that boundary. Mechanical latency at 7200 RPM and the 40% workload guideline further bound real-world performance in busy arrays. The drive is qualified for HPE ProLiant environments and supports SMART monitoring via HPE Systems Insight Manager. Hot-swap capability depends on the backplane and carrier support in the host chassis.

3TB Capacity Decides Fit

The single specification that determines suitability is the 3TB capacity; if the application demands more storage this drive will not meet the requirement. Buyers who need a larger single volume or higher endurance for mission-critical workloads should look elsewhere. The part number 628061-B21 identifies this exact configuration for ordering and compatibility checks. No other capacity or interface variant is described by this listing.

Poudarki

  • 3 TB capacity for large-scale storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for high-throughput transfers
  • 5-inch LFF form factor fits standard drive bays
  • Smart Carrier enables tool-less hot-swap installation

Specifikacije

BrandHPE
Part Number628061-B21
InterfaceSATA 6.0Gb/s
Capacity3TB
RPM7200 RPM
Form Factor3.5"

Vprašanja o tem izdelku

Should I pick the 3 TB 7200 RPM LFF version or a smaller capacity for my server?

The 3 TB model gives the lowest cost per gigabyte and is built for workloads of 40 % or less, making it the economical choice for bulk storage in a ProLiant bay.

What does the 7200 RPM rating mean once the drive is installed in a ProLiant server?

At 7200 RPM the platters spin fast enough for steady sequential throughput on near-line workloads while keeping power draw modest for a 3.5-inch LFF bay.

How does the SATA 6.0 Gb/s interface limit real-world transfer speeds?

The 6.0 Gb/s link sets the bus ceiling; actual sustained reads and writes will be governed by the drive’s own 7200 RPM mechanics and the controller’s queue depth.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.