Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
HPE 3TB 3.5 inch SATA hard drive with Smart Carrier tray attached

HPE

HPE 628061-B21 3TB 7200 RPM SATA 6.0Gb/s 3.5" LFF internal hard drive with Smart Carrier

SKU CH-CMZZ-7G2B0

3.5-inch SATA 6.0Gb/s 3TB hard drive spinning at 7200 RPM with hot-swap Smart Carrier for HPE ProLiant servers

  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 3 TB capacity for large-scale storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for high-throughput transfers
  • 5-inch LFF form factor fits standard drive bays
  • Smart Carrier enables tool-less hot-swap installation

3TB SATA Hard Drive for Servers

This HPE 3.5-inch LFF hard drive delivers 3TB of storage over a SATA 6.0Gb/s interface at 7200 RPM. It ships with a Smart Carrier tray attached for hot-swap installation in compatible bays. The drive is designed for non mission-critical server applications and storage environments where high capacity and reliability are required. It targets workloads of 40% or less.

SATA 6.0Gb/s Interface Limits

The SATA 6.0Gb/s link caps sequential throughput at the interface ceiling, so sustained rates cannot exceed that boundary. Mechanical latency at 7200 RPM and the 40% workload guideline further bound real-world performance in busy arrays. The drive is qualified for HPE ProLiant environments and supports SMART monitoring via HPE Systems Insight Manager. Hot-swap capability depends on the backplane and carrier support in the host chassis.

3TB Capacity Decides Fit

The single specification that determines suitability is the 3TB capacity; if the application demands more storage this drive will not meet the requirement. Buyers who need a larger single volume or higher endurance for mission-critical workloads should look elsewhere. The part number 628061-B21 identifies this exact configuration for ordering and compatibility checks. No other capacity or interface variant is described by this listing.

Pluspunten

  • 3 TB capacity for large-scale storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for high-throughput transfers
  • 5-inch LFF form factor fits standard drive bays
  • Smart Carrier enables tool-less hot-swap installation

Specificaties

BrandHPE
Part Number628061-B21
InterfaceSATA 6.0Gb/s
Capacity3TB
RPM7200 RPM
Form Factor3.5"

Vragen over dit artikel

Should I pick the 3 TB 7200 RPM LFF version or a smaller capacity for my server?

The 3 TB model gives the lowest cost per gigabyte and is built for workloads of 40 % or less, making it the economical choice for bulk storage in a ProLiant bay.

What does the 7200 RPM rating mean once the drive is installed in a ProLiant server?

At 7200 RPM the platters spin fast enough for steady sequential throughput on near-line workloads while keeping power draw modest for a 3.5-inch LFF bay.

How does the SATA 6.0 Gb/s interface limit real-world transfer speeds?

The 6.0 Gb/s link sets the bus ceiling; actual sustained reads and writes will be governed by the drive’s own 7200 RPM mechanics and the controller’s queue depth.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.