نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
HPE 3TB 3.5 inch SATA hard drive with Smart Carrier tray attached

HPE

HPE 628061-B21 3TB 7200 RPM SATA 6.0Gb/s 3.5" LFF internal hard drive with Smart Carrier

SKU CH-CMZZ-7G2B0

3.5-inch SATA 6.0Gb/s 3TB hard drive spinning at 7200 RPM with hot-swap Smart Carrier for HPE ProLiant servers

  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 3 TB capacity for large-scale storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for high-throughput transfers
  • 5-inch LFF form factor fits standard drive bays
  • Smart Carrier enables tool-less hot-swap installation

3TB SATA Hard Drive for Servers

This HPE 3.5-inch LFF hard drive delivers 3TB of storage over a SATA 6.0Gb/s interface at 7200 RPM. It ships with a Smart Carrier tray attached for hot-swap installation in compatible bays. The drive is designed for non mission-critical server applications and storage environments where high capacity and reliability are required. It targets workloads of 40% or less.

SATA 6.0Gb/s Interface Limits

The SATA 6.0Gb/s link caps sequential throughput at the interface ceiling, so sustained rates cannot exceed that boundary. Mechanical latency at 7200 RPM and the 40% workload guideline further bound real-world performance in busy arrays. The drive is qualified for HPE ProLiant environments and supports SMART monitoring via HPE Systems Insight Manager. Hot-swap capability depends on the backplane and carrier support in the host chassis.

3TB Capacity Decides Fit

The single specification that determines suitability is the 3TB capacity; if the application demands more storage this drive will not meet the requirement. Buyers who need a larger single volume or higher endurance for mission-critical workloads should look elsewhere. The part number 628061-B21 identifies this exact configuration for ordering and compatibility checks. No other capacity or interface variant is described by this listing.

أبرز المميزات

  • 3 TB capacity for large-scale storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for high-throughput transfers
  • 5-inch LFF form factor fits standard drive bays
  • Smart Carrier enables tool-less hot-swap installation

المواصفات

BrandHPE
Part Number628061-B21
InterfaceSATA 6.0Gb/s
Capacity3TB
RPM7200 RPM
Form Factor3.5"

أسئلة حول هذا المنتج

Should I pick the 3 TB 7200 RPM LFF version or a smaller capacity for my server?

The 3 TB model gives the lowest cost per gigabyte and is built for workloads of 40 % or less, making it the economical choice for bulk storage in a ProLiant bay.

What does the 7200 RPM rating mean once the drive is installed in a ProLiant server?

At 7200 RPM the platters spin fast enough for steady sequential throughput on near-line workloads while keeping power draw modest for a 3.5-inch LFF bay.

How does the SATA 6.0 Gb/s interface limit real-world transfer speeds?

The 6.0 Gb/s link sets the bus ceiling; actual sustained reads and writes will be governed by the drive’s own 7200 RPM mechanics and the controller’s queue depth.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.