Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

IBM

IBM 94Y5266 Xeon E5-2660 v2 10-core 2.2 GHz 25 MB L3 server processor

SKU CH-ZB30-K5K7Q MPN 94Y5266

Refurbished 10-core Xeon server processor running at 2.2 GHz with 25 MB L3 cache and DDR3-1866 memory support

  • Integrated Memory Controller SpeedDDR3 1866
  • 10 cores handle parallel workloads
  • 2 GHz base frequency sustains steady throughput
  • 25 MB L3 cache reduces memory latency
  • DDR3 1866 memory controller supports high-speed RAM

Refurbished 10-core Xeon server processor

This refurbished IBM 94Y5266 mounts a Xeon E5-2660 v2 with ten cores running at 2.2 GHz and a 25 MB L3 cache. It fits an FCLGA2011 socket and is rated at 95 W TDP, built on a 22 nm process for dual-socket server boards.

25 MB cache and DDR3-1866 memory controller

The 25 MB shared L3 cache and integrated DDR3-1866 controller give headroom for virtualisation hosts and database nodes that fit in available memory channels. Workloads needing more than ten cores, higher single-thread frequency or newer DDR generations will exceed this processor's limits.

Poudarki

  • 10 cores handle parallel workloads
  • 2 GHz base frequency sustains steady throughput
  • 25 MB L3 cache reduces memory latency
  • DDR3 1866 memory controller supports high-speed RAM

Specifikacije

Integrated Memory Controller SpeedDDR3 1866
Teža pošiljke0.91 kg
Velikost pošiljke127 × 127 × 51 mm

Vprašanja o tem izdelku

Will this Xeon E5-2660 v2 work in my existing LGA 2011 motherboard that currently runs an older Xeon?

The processor fits the FCLGA2011 socket, so it will install in any motherboard with that socket, but the board must also support 22 nm Ivy Bridge-EP CPUs and provide a BIOS that recognises the 10-core 2.2 GHz model.

How can I confirm the CPU is running at its rated 2.2 GHz with all 10 cores active after installation?

Enter the BIOS or use a Linux command such as lscpu to verify the reported clock speed shows 2.2 GHz and the core count reads 10; the integrated memory controller should also report DDR3 1866 operation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.