Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

IBM

IBM 94Y5266 Xeon E5-2660 v2 10-core 2.2 GHz 25 MB L3 server processor

SKU CH-ZB30-K5K7Q MPN 94Y5266

Refurbished 10-core Xeon server processor running at 2.2 GHz with 25 MB L3 cache and DDR3-1866 memory support

  • Integrated Memory Controller SpeedDDR3 1866
  • 10 cores handle parallel workloads
  • 2 GHz base frequency sustains steady throughput
  • 25 MB L3 cache reduces memory latency
  • DDR3 1866 memory controller supports high-speed RAM

Refurbished 10-core Xeon server processor

This refurbished IBM 94Y5266 mounts a Xeon E5-2660 v2 with ten cores running at 2.2 GHz and a 25 MB L3 cache. It fits an FCLGA2011 socket and is rated at 95 W TDP, built on a 22 nm process for dual-socket server boards.

25 MB cache and DDR3-1866 memory controller

The 25 MB shared L3 cache and integrated DDR3-1866 controller give headroom for virtualisation hosts and database nodes that fit in available memory channels. Workloads needing more than ten cores, higher single-thread frequency or newer DDR generations will exceed this processor's limits.

I korthet

  • 10 cores handle parallel workloads
  • 2 GHz base frequency sustains steady throughput
  • 25 MB L3 cache reduces memory latency
  • DDR3 1866 memory controller supports high-speed RAM

Specifikationer

Integrated Memory Controller SpeedDDR3 1866
Fraktvikt0.91 kg
Paketstorlek127 × 127 × 51 mm

Frågor om den här produkten

Will this Xeon E5-2660 v2 work in my existing LGA 2011 motherboard that currently runs an older Xeon?

The processor fits the FCLGA2011 socket, so it will install in any motherboard with that socket, but the board must also support 22 nm Ivy Bridge-EP CPUs and provide a BIOS that recognises the 10-core 2.2 GHz model.

How can I confirm the CPU is running at its rated 2.2 GHz with all 10 cores active after installation?

Enter the BIOS or use a Linux command such as lscpu to verify the reported clock speed shows 2.2 GHz and the core count reads 10; the integrated memory controller should also report DDR3 1866 operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.