Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

IBM

IBM 94Y5266 Xeon E5-2660 v2 10-core 2.2 GHz 25 MB L3 server processor

SKU CH-ZB30-K5K7Q MPN 94Y5266

Refurbished 10-core Xeon server processor running at 2.2 GHz with 25 MB L3 cache and DDR3-1866 memory support

  • Integrated Memory Controller SpeedDDR3 1866
  • 10 cores handle parallel workloads
  • 2 GHz base frequency sustains steady throughput
  • 25 MB L3 cache reduces memory latency
  • DDR3 1866 memory controller supports high-speed RAM

Refurbished 10-core Xeon server processor

This refurbished IBM 94Y5266 mounts a Xeon E5-2660 v2 with ten cores running at 2.2 GHz and a 25 MB L3 cache. It fits an FCLGA2011 socket and is rated at 95 W TDP, built on a 22 nm process for dual-socket server boards.

25 MB cache and DDR3-1866 memory controller

The 25 MB shared L3 cache and integrated DDR3-1866 controller give headroom for virtualisation hosts and database nodes that fit in available memory channels. Workloads needing more than ten cores, higher single-thread frequency or newer DDR generations will exceed this processor's limits.

Najważniejsze cechy

  • 10 cores handle parallel workloads
  • 2 GHz base frequency sustains steady throughput
  • 25 MB L3 cache reduces memory latency
  • DDR3 1866 memory controller supports high-speed RAM

Specyfikacja

Integrated Memory Controller SpeedDDR3 1866
Waga przesyłki0.91 kg
Wymiary opakowania127 × 127 × 51 mm

Pytania dotyczące tego produktu

Will this Xeon E5-2660 v2 work in my existing LGA 2011 motherboard that currently runs an older Xeon?

The processor fits the FCLGA2011 socket, so it will install in any motherboard with that socket, but the board must also support 22 nm Ivy Bridge-EP CPUs and provide a BIOS that recognises the 10-core 2.2 GHz model.

How can I confirm the CPU is running at its rated 2.2 GHz with all 10 cores active after installation?

Enter the BIOS or use a Linux command such as lscpu to verify the reported clock speed shows 2.2 GHz and the core count reads 10; the integrated memory controller should also report DDR3 1866 operation.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.