Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Spool of translucent water-soluble filament 2.85 mm diameter 0.75 kg

Lay Filaments

Lay Filaments Lay-Cloud Dissolvable Support Filament 3.0mm 0.75kg 3d printers accessory

SKU CH-AVVA-9FY03

Water-soluble 2.85 mm support filament for flexible prints, 0.75 kg spool, prints at 230-240 °C

  • Water-soluble support dissolves in cold or hot water leaving no residue
  • Removable without damaging the final printed piece
  • Designed for flexible and semi-flexible filaments such as TPE
  • Prints at 230-240 degC with ±0.1 mm diameter tolerance
  • 75 kg spool of 2.85 mm filament for dual-extruder setups

Lay-Cloud Dissolvable Support Filament

Lay Filaments Lay-Cloud is a water-soluble support filament designed for dual-extrusion 3D printers. It works specifically with flexible or semi-flexible materials such as TPE. After printing, supports dissolve completely in cold or hot water without damaging the final piece.

Makers printing flexible parts needing soluble

This filament suits users producing flexible models that require removable internal structures. It is not intended for builders using only rigid materials like PLA or ABS, nor for those without a dual-extruder printer capable of handling the required printing temperature range.

2.85 mm diameter with ±0.1 mm tolerance

The filament measures 2.85 mm with a tolerance of ±0.1 mm and prints at 230-240 degC. Spools weigh 0.75 kg. Confirm your printer accepts this diameter and temperature range before use.

Poudarki

  • Water-soluble support dissolves in cold or hot water leaving no residue
  • Removable without damaging the final printed piece
  • Designed for flexible and semi-flexible filaments such as TPE
  • Prints at 230-240 degC with ±0.1 mm diameter tolerance
  • 75 kg spool of 2.85 mm filament for dual-extruder setups

Specifikacije

BrandLay Filaments

Vprašanja o tem izdelku

Should I order the 3.0 mm or 2.85 mm diameter spool?

The filament measures 2.85 mm with a tolerance of ± 0.1 mm, so choose the 2.85 mm option for your printer.

What does the 230-240 °C printing temperature mean for my extruder?

Your hot-end must reach and hold 230 to 240 °C to melt this water-soluble support material reliably.

How does the water-soluble interface work in practice?

After printing, submerge the part in cold or hot water for a few hours; the support dissolves completely without leaving residue.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.