نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Spool of translucent water-soluble filament 2.85 mm diameter 0.75 kg

Lay Filaments

Lay Filaments Lay-Cloud Dissolvable Support Filament 3.0mm 0.75kg 3d printers accessory

SKU CH-AVVA-9FY03

Water-soluble 2.85 mm support filament for flexible prints, 0.75 kg spool, prints at 230-240 °C

  • Water-soluble support dissolves in cold or hot water leaving no residue
  • Removable without damaging the final printed piece
  • Designed for flexible and semi-flexible filaments such as TPE
  • Prints at 230-240 degC with ±0.1 mm diameter tolerance
  • 75 kg spool of 2.85 mm filament for dual-extruder setups

Lay-Cloud Dissolvable Support Filament

Lay Filaments Lay-Cloud is a water-soluble support filament designed for dual-extrusion 3D printers. It works specifically with flexible or semi-flexible materials such as TPE. After printing, supports dissolve completely in cold or hot water without damaging the final piece.

Makers printing flexible parts needing soluble

This filament suits users producing flexible models that require removable internal structures. It is not intended for builders using only rigid materials like PLA or ABS, nor for those without a dual-extruder printer capable of handling the required printing temperature range.

2.85 mm diameter with ±0.1 mm tolerance

The filament measures 2.85 mm with a tolerance of ±0.1 mm and prints at 230-240 degC. Spools weigh 0.75 kg. Confirm your printer accepts this diameter and temperature range before use.

أبرز المميزات

  • Water-soluble support dissolves in cold or hot water leaving no residue
  • Removable without damaging the final printed piece
  • Designed for flexible and semi-flexible filaments such as TPE
  • Prints at 230-240 degC with ±0.1 mm diameter tolerance
  • 75 kg spool of 2.85 mm filament for dual-extruder setups

المواصفات

BrandLay Filaments

أسئلة حول هذا المنتج

Should I order the 3.0 mm or 2.85 mm diameter spool?

The filament measures 2.85 mm with a tolerance of ± 0.1 mm, so choose the 2.85 mm option for your printer.

What does the 230-240 °C printing temperature mean for my extruder?

Your hot-end must reach and hold 230 to 240 °C to melt this water-soluble support material reliably.

How does the water-soluble interface work in practice?

After printing, submerge the part in cold or hot water for a few hours; the support dissolves completely without leaving residue.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.