暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Spool of translucent water-soluble filament 2.85 mm diameter 0.75 kg

Lay Filaments

Lay Filaments Lay-Cloud Dissolvable Support Filament 3.0mm 0.75kg 3d printers accessory

SKU CH-AVVA-9FY03

Water-soluble 2.85 mm support filament for flexible prints, 0.75 kg spool, prints at 230-240 °C

  • Water-soluble support dissolves in cold or hot water leaving no residue
  • Removable without damaging the final printed piece
  • Designed for flexible and semi-flexible filaments such as TPE
  • Prints at 230-240 degC with ±0.1 mm diameter tolerance
  • 75 kg spool of 2.85 mm filament for dual-extruder setups

Lay-Cloud Dissolvable Support Filament

Lay Filaments Lay-Cloud is a water-soluble support filament designed for dual-extrusion 3D printers. It works specifically with flexible or semi-flexible materials such as TPE. After printing, supports dissolve completely in cold or hot water without damaging the final piece.

Makers printing flexible parts needing soluble

This filament suits users producing flexible models that require removable internal structures. It is not intended for builders using only rigid materials like PLA or ABS, nor for those without a dual-extruder printer capable of handling the required printing temperature range.

2.85 mm diameter with ±0.1 mm tolerance

The filament measures 2.85 mm with a tolerance of ±0.1 mm and prints at 230-240 degC. Spools weigh 0.75 kg. Confirm your printer accepts this diameter and temperature range before use.

特長

  • Water-soluble support dissolves in cold or hot water leaving no residue
  • Removable without damaging the final printed piece
  • Designed for flexible and semi-flexible filaments such as TPE
  • Prints at 230-240 degC with ±0.1 mm diameter tolerance
  • 75 kg spool of 2.85 mm filament for dual-extruder setups

仕様

BrandLay Filaments

この商品に関する質問

Should I order the 3.0 mm or 2.85 mm diameter spool?

The filament measures 2.85 mm with a tolerance of ± 0.1 mm, so choose the 2.85 mm option for your printer.

What does the 230-240 °C printing temperature mean for my extruder?

Your hot-end must reach and hold 230 to 240 °C to melt this water-soluble support material reliably.

How does the water-soluble interface work in practice?

After printing, submerge the part in cold or hot water for a few hours; the support dissolves completely without leaving residue.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。