Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with gold connectors and mounting holes

LORDWORLD

LORDWORLD CM4 Interface Protection Adapter Board

SKU CH-QXXS-P2KRY

Protects the Raspberry Pi CM4 socket from wear during repeated module swaps

  • Protects CM4 socket from wear during frequent module swaps
  • Extends connector lifespan by absorbing repeated insertion force
  • Maintains reliable electrical contact across many connection cycles
  • Designed specifically for Raspberry Pi Compute Module 4 series
  • Enables rapid development workflows needing constant module changes

CM4 Interface Protection Adapter

The LORDWORLD adapter board serves as a physical shield for the Raspberry Pi Compute Module 4 socket. It is designed for developers and engineers who repeatedly swap modules during prototyping or testing. The HAT format ensures direct compatibility with the CM4 form factor. This accessory targets workflows where connector wear is a practical concern.

Replaces Direct Socket Wear

Instead of plugging the Compute Module 4 directly into a carrier board, this adapter absorbs the mechanical stress of repeated insertion cycles. It is worth adopting when a project demands daily module changes for firmware validation or hardware bring-up. The board prevents bent pins and socket degradation on the more expensive carrier hardware. It suits any CM4-series module without modification.

Sustained Insertion Cycles

Under continuous development schedules the adapter maintains reliable electrical contact across hundreds of mating cycles. Gold-plated contacts resist oxidation that can accumulate during long test campaigns. The rigid PCB construction prevents flex that might misalign pins during rapid swaps. No active cooling or power management is required for the adapter itself.

Poudarki

  • Protects CM4 socket from wear during frequent module swaps
  • Extends connector lifespan by absorbing repeated insertion force
  • Maintains reliable electrical contact across many connection cycles
  • Designed specifically for Raspberry Pi Compute Module 4 series
  • Enables rapid development workflows needing constant module changes

Specifikacije

BrandLORDWORLD

Vprašanja o tem izdelku

What form factor does the LORDWORLD CM4 adapter board use so it fits my Raspberry Pi Compute Module 4?

The board is built as a HAT that aligns with the standard Raspberry Pi Compute Module 4 footprint, matching the module's mounting holes and 40-pin GPIO header spacing for direct stacking.

How do I install the adapter without damaging the CM4 socket during repeated insertions?

Seat the Compute Module 4 vertically into the adapter's socket first, then press the combined assembly onto the carrier board's GPIO header; forcing the module in at an angle bends the socket pins.

Which parts wear out first if I swap Compute Module 4 units daily, and can they be replaced?

The high-cycle CM4 socket on the adapter is the primary wear item; it is surface-mounted, so replacing it requires hot-air rework rather than a simple plug-in swap.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.