暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold connectors and mounting holes

LORDWORLD

LORDWORLD CM4 Interface Protection Adapter Board

SKU CH-QXXS-P2KRY

Protects the Raspberry Pi CM4 socket from wear during repeated module swaps

  • Protects CM4 socket from wear during frequent module swaps
  • Extends connector lifespan by absorbing repeated insertion force
  • Maintains reliable electrical contact across many connection cycles
  • Designed specifically for Raspberry Pi Compute Module 4 series
  • Enables rapid development workflows needing constant module changes

CM4 Interface Protection Adapter

The LORDWORLD adapter board serves as a physical shield for the Raspberry Pi Compute Module 4 socket. It is designed for developers and engineers who repeatedly swap modules during prototyping or testing. The HAT format ensures direct compatibility with the CM4 form factor. This accessory targets workflows where connector wear is a practical concern.

Replaces Direct Socket Wear

Instead of plugging the Compute Module 4 directly into a carrier board, this adapter absorbs the mechanical stress of repeated insertion cycles. It is worth adopting when a project demands daily module changes for firmware validation or hardware bring-up. The board prevents bent pins and socket degradation on the more expensive carrier hardware. It suits any CM4-series module without modification.

Sustained Insertion Cycles

Under continuous development schedules the adapter maintains reliable electrical contact across hundreds of mating cycles. Gold-plated contacts resist oxidation that can accumulate during long test campaigns. The rigid PCB construction prevents flex that might misalign pins during rapid swaps. No active cooling or power management is required for the adapter itself.

特長

  • Protects CM4 socket from wear during frequent module swaps
  • Extends connector lifespan by absorbing repeated insertion force
  • Maintains reliable electrical contact across many connection cycles
  • Designed specifically for Raspberry Pi Compute Module 4 series
  • Enables rapid development workflows needing constant module changes

仕様

BrandLORDWORLD

この商品に関する質問

What form factor does the LORDWORLD CM4 adapter board use so it fits my Raspberry Pi Compute Module 4?

The board is built as a HAT that aligns with the standard Raspberry Pi Compute Module 4 footprint, matching the module's mounting holes and 40-pin GPIO header spacing for direct stacking.

How do I install the adapter without damaging the CM4 socket during repeated insertions?

Seat the Compute Module 4 vertically into the adapter's socket first, then press the combined assembly onto the carrier board's GPIO header; forcing the module in at an angle bends the socket pins.

Which parts wear out first if I swap Compute Module 4 units daily, and can they be replaced?

The high-cycle CM4 socket on the adapter is the primary wear item; it is surface-mounted, so replacing it requires hot-air rework rather than a simple plug-in swap.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。