OEM Industries
OEM Industries 1606KL-05W-B50 40mm 24V 0.08A 3-Pin CPU Cooler
Compact 40 mm ball-bearing fan runs on 24 V at 0.08 A with a 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Compact 40 mm frame fits tight chassis spaces
- 24 V 0.08 A draw keeps power demand low
- Ball-bearing motor extends operational life
- Three-pin connector enables speed monitoring
- Black square design suits discreet builds
Compact 40 mm case fan
The OEM Industries 1606KL-05W-B50 is a 40 mm square DC fan designed for chassis ventilation. It runs on a 24 V supply and draws 0.08 A through a three-pin connector. The black frame houses a ball-bearing motor without any LED lighting.
Suited for tight airflow paths
This fan suits builders who need a small 40 mm unit for auxiliary case cooling or replacement in legacy equipment. It is not intended for direct CPU heatsink mounting, for high-static-pressure radiator use, or for systems that require PWM speed control via a four-pin header.
Steady low-power operation
Under continuous load the ball bearing maintains consistent rotation at the rated voltage and current. The three-wire connection allows the motherboard to monitor RPM while the fan runs at a fixed 24 V level. No thermal throttling or speed curves are built into the device itself.
Poudarki
- Compact 40 mm frame fits tight chassis spaces
- 24 V 0.08 A draw keeps power demand low
- Ball-bearing motor extends operational life
- Three-pin connector enables speed monitoring
- Black square design suits discreet builds
Specifikacije
| Model | 1606KL-05W-B50 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Vprašanja o tem izdelku
What voltage header must my motherboard provide for this 24 V fan to spin?
The fan is rated for 24 V, so the motherboard header or fan controller must supply 24 V.
Can I plug this 40 mm, 3-pin cooler into a standard 4-pin PWM header on an older board?
Yes, the 3-pin connector fits a 4-pin header; the fan will run at full speed because PWM control is not present.
How can I verify the 0.08 A ball-bearing fan is running correctly after installation?
Check that the fan spins smoothly at full speed and listen for quiet ball-bearing operation with no rattling.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001037BTC
Na zalogi