暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 40mm square 24V 0.08A 3-pin CPU fan

OEM Industries

OEM Industries 1606KL-05W-B50 40mm 24V 0.08A 3-Pin CPU Cooler

SKU CH-B76W-RYV2J

Compact 40 mm ball-bearing fan runs on 24 V at 0.08 A with a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A draw keeps power demand low
  • Ball-bearing motor extends operational life
  • Three-pin connector enables speed monitoring
  • Black square design suits discreet builds

Compact 40 mm case fan

The OEM Industries 1606KL-05W-B50 is a 40 mm square DC fan designed for chassis ventilation. It runs on a 24 V supply and draws 0.08 A through a three-pin connector. The black frame houses a ball-bearing motor without any LED lighting.

Suited for tight airflow paths

This fan suits builders who need a small 40 mm unit for auxiliary case cooling or replacement in legacy equipment. It is not intended for direct CPU heatsink mounting, for high-static-pressure radiator use, or for systems that require PWM speed control via a four-pin header.

Steady low-power operation

Under continuous load the ball bearing maintains consistent rotation at the rated voltage and current. The three-wire connection allows the motherboard to monitor RPM while the fan runs at a fixed 24 V level. No thermal throttling or speed curves are built into the device itself.

特長

  • Compact 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A draw keeps power demand low
  • Ball-bearing motor extends operational life
  • Three-pin connector enables speed monitoring
  • Black square design suits discreet builds

仕様

Model1606KL-05W-B50
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

What voltage header must my motherboard provide for this 24 V fan to spin?

The fan is rated for 24 V, so the motherboard header or fan controller must supply 24 V.

Can I plug this 40 mm, 3-pin cooler into a standard 4-pin PWM header on an older board?

Yes, the 3-pin connector fits a 4-pin header; the fan will run at full speed because PWM control is not present.

How can I verify the 0.08 A ball-bearing fan is running correctly after installation?

Check that the fan spins smoothly at full speed and listen for quiet ball-bearing operation with no rattling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。