VisionTek
VisionTek 901311 PRO HXS 1 TB 2.5" SATA internal SSD
A 1 TB 2.5" SATA internal SSD with 560 MB/s read speed and SLC caching for faster bursts
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity1TB
- Memory Components3D NAND TLC
- InterfaceSATA III
- 1 TB capacity for ample file and application storage
- Up to 560 MB/s sequential read for fast boot and load times
- 5" 7 mm form factor fits standard laptop and desktop bays
- SATA III 600 MB/s interface works with existing SATA cables and controllers
- SLC caching and LDPC ECC protect data integrity during heavy write workloads
VisionTek PRO HXS 1 TB SATA SSD
The VisionTek PRO HXS 1 TB solid-state drive uses a 2.5 inch form factor and a SATA III interface to deliver up to 560 MBps sequential read speeds. It is built with 3D NAND TLC memory and a Silicon Motion SM2258HX controller that employs SLC caching for burst workloads. The drive targets desktop and laptop users who want a direct hard-drive replacement with faster boot and application load times.
Check SATA port and 2.5 inch bay compatibility
Verify that your motherboard or laptop has a free SATA 6 Gbps port and a standard 2.5 inch drive bay or caddy before ordering. The drive conforms to the industry-standard SATA connector specification and requires no additional drivers for basic operation. Ensure your operating system supports the TRIM command to maintain long-term performance.
Thermals noise and power efficiency
With no moving parts the SSD runs silently and generates minimal heat during typical workloads. DEVSLP support allows the drive to enter a low-power state when idle, reducing overall system power draw. The controller manages write amplification and uses global wear leveling plus LDPC error correction to sustain reliability without active cooling.
Poudarki
- 1 TB capacity for ample file and application storage
- Up to 560 MB/s sequential read for fast boot and load times
- 5" 7 mm form factor fits standard laptop and desktop bays
- SATA III 600 MB/s interface works with existing SATA cables and controllers
- SLC caching and LDPC ECC protect data integrity during heavy write workloads
Specifikacije
| Brand | VisionTek |
|---|---|
| Series | PRO HXS |
| Part Number | 901311 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Protocol | SATA |
| Cache | No DRAM (SLC) |
| Max Sequential Read | Up to 560 MBps |
| Weight | 1 |
| Teža pošiljke | 0.45 kg |
| Velikost pošiljke | 184 × 102 × 13 mm |
Vprašanja o tem izdelku
What comes with the VisionTek 901311 PRO HXS 1 TB 2.5" SATA internal SSD and what must be purchased separately?
The drive itself is included; mounting screws, SATA data cables and any 2.5" to 3.5" adapter brackets are not supplied and must be sourced separately.
Which capacity of the PRO HXS series should I choose if I need 1 TB of storage?
Select the 1 TB model (part number 901311); it is the only capacity listed for this series in the available data.
What does the 560 MB/s maximum read figure mean once the drive is installed in a real machine?
It represents the peak sequential read speed over the SATA 600 interface; actual throughput will vary with system configuration, workload and the SLC cache behaviour of the Silicon Motion SM2258HX controller.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
