We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 2.5 inch internal SSD with SATA connectors

VisionTek

VisionTek 901311 PRO HXS 1 TB 2.5" SATA internal SSD

SKU CH-P9QX-T59QB MPN 901311

A 1 TB 2.5" SATA internal SSD with 560 MB/s read speed and SLC caching for faster bursts

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity1TB
  • Memory Components3D NAND TLC
  • InterfaceSATA III
  • 1 TB capacity for ample file and application storage
  • Up to 560 MB/s sequential read for fast boot and load times
  • 5" 7 mm form factor fits standard laptop and desktop bays
  • SATA III 600 MB/s interface works with existing SATA cables and controllers
  • SLC caching and LDPC ECC protect data integrity during heavy write workloads

VisionTek PRO HXS 1 TB SATA SSD

The VisionTek PRO HXS 1 TB solid-state drive uses a 2.5 inch form factor and a SATA III interface to deliver up to 560 MBps sequential read speeds. It is built with 3D NAND TLC memory and a Silicon Motion SM2258HX controller that employs SLC caching for burst workloads. The drive targets desktop and laptop users who want a direct hard-drive replacement with faster boot and application load times.

Check SATA port and 2.5 inch bay compatibility

Verify that your motherboard or laptop has a free SATA 6 Gbps port and a standard 2.5 inch drive bay or caddy before ordering. The drive conforms to the industry-standard SATA connector specification and requires no additional drivers for basic operation. Ensure your operating system supports the TRIM command to maintain long-term performance.

Thermals noise and power efficiency

With no moving parts the SSD runs silently and generates minimal heat during typical workloads. DEVSLP support allows the drive to enter a low-power state when idle, reducing overall system power draw. The controller manages write amplification and uses global wear leveling plus LDPC error correction to sustain reliability without active cooling.

Highlights

  • 1 TB capacity for ample file and application storage
  • Up to 560 MB/s sequential read for fast boot and load times
  • 5" 7 mm form factor fits standard laptop and desktop bays
  • SATA III 600 MB/s interface works with existing SATA cables and controllers
  • SLC caching and LDPC ECC protect data integrity during heavy write workloads

Specifications

BrandVisionTek
SeriesPRO HXS
Part Number901311
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form Factor2.5"
Capacity1TB
Memory Components3D NAND TLC
InterfaceSATA III
ProtocolSATA
CacheNo DRAM (SLC)
Max Sequential ReadUp to 560 MBps
Weight1
Shipping weight0.45 kg
Package size184 × 102 × 13 mm

Questions about this item

What comes with the VisionTek 901311 PRO HXS 1 TB 2.5" SATA internal SSD and what must be purchased separately?

The drive itself is included; mounting screws, SATA data cables and any 2.5" to 3.5" adapter brackets are not supplied and must be sourced separately.

Which capacity of the PRO HXS series should I choose if I need 1 TB of storage?

Select the 1 TB model (part number 901311); it is the only capacity listed for this series in the available data.

What does the 560 MB/s maximum read figure mean once the drive is installed in a real machine?

It represents the peak sequential read speed over the SATA 600 interface; actual throughput will vary with system configuration, workload and the SLC cache behaviour of the Silicon Motion SM2258HX controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.