VisionTek
VisionTek 901311 PRO HXS 1 TB 2.5" SATA internal SSD
A 1 TB 2.5" SATA internal SSD with 560 MB/s read speed and SLC caching for faster bursts
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity1TB
- Memory Components3D NAND TLC
- InterfaceSATA III
- 1 TB capacity for ample file and application storage
- Up to 560 MB/s sequential read for fast boot and load times
- 5" 7 mm form factor fits standard laptop and desktop bays
- SATA III 600 MB/s interface works with existing SATA cables and controllers
- SLC caching and LDPC ECC protect data integrity during heavy write workloads
VisionTek PRO HXS 1 TB SATA SSD
The VisionTek PRO HXS 1 TB solid-state drive uses a 2.5 inch form factor and a SATA III interface to deliver up to 560 MBps sequential read speeds. It is built with 3D NAND TLC memory and a Silicon Motion SM2258HX controller that employs SLC caching for burst workloads. The drive targets desktop and laptop users who want a direct hard-drive replacement with faster boot and application load times.
Check SATA port and 2.5 inch bay compatibility
Verify that your motherboard or laptop has a free SATA 6 Gbps port and a standard 2.5 inch drive bay or caddy before ordering. The drive conforms to the industry-standard SATA connector specification and requires no additional drivers for basic operation. Ensure your operating system supports the TRIM command to maintain long-term performance.
Thermals noise and power efficiency
With no moving parts the SSD runs silently and generates minimal heat during typical workloads. DEVSLP support allows the drive to enter a low-power state when idle, reducing overall system power draw. The controller manages write amplification and uses global wear leveling plus LDPC error correction to sustain reliability without active cooling.
Pontos fortes
- 1 TB capacity for ample file and application storage
- Up to 560 MB/s sequential read for fast boot and load times
- 5" 7 mm form factor fits standard laptop and desktop bays
- SATA III 600 MB/s interface works with existing SATA cables and controllers
- SLC caching and LDPC ECC protect data integrity during heavy write workloads
Especificações
| Brand | VisionTek |
|---|---|
| Series | PRO HXS |
| Part Number | 901311 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Protocol | SATA |
| Cache | No DRAM (SLC) |
| Max Sequential Read | Up to 560 MBps |
| Weight | 1 |
| Peso de envio | 0.45 kg |
| Dimensões da embalagem | 184 × 102 × 13 mm |
Perguntas sobre este artigo
What comes with the VisionTek 901311 PRO HXS 1 TB 2.5" SATA internal SSD and what must be purchased separately?
The drive itself is included; mounting screws, SATA data cables and any 2.5" to 3.5" adapter brackets are not supplied and must be sourced separately.
Which capacity of the PRO HXS series should I choose if I need 1 TB of storage?
Select the 1 TB model (part number 901311); it is the only capacity listed for this series in the available data.
What does the 560 MB/s maximum read figure mean once the drive is installed in a real machine?
It represents the peak sequential read speed over the SATA 600 interface; actual throughput will vary with system configuration, workload and the SLC cache behaviour of the Silicon Motion SM2258HX controller.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
