Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR3L ECC UDIMM modules with gold contacts on black PCBs

A-Tech

A-Tech 16GB (4x4GB) DDR3L 1333 ECC UDIMM 240-Pin 2Rx8 1.35V Server RAM

SKU CH-WBTA-S15G7

A 16 GB quad-channel DDR3L 1333 kit with ECC unbuffered DIMMs for servers and workstations

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Speed DDR3L 1333 (PC3L 10600)

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Low-voltage 1.35 V operation reduces power draw
  • 240-pin DIMM form factor fits compatible server slots

Server DDR3L ECC kit

This 16 GB kit contains four 4 GB unbuffered ECC UDIMMs built for DDR3 and DDR3L servers and workstations. The modules run at 1333 MHz with CL9 latency and operate at 1.35 V, with support for 1.5 V where required. They are not compatible with desktop or laptop computers.

Capacity and headroom

The quad-channel kit provides 16 GB total capacity for multi-threaded server workloads such as virtualization, database caching and file serving. Dual-rank 2Rx8 organization helps fill memory channels efficiently, though the 1333 MHz speed limits bandwidth compared to faster DDR3L grades. Workloads needing more than 16 GB or higher throughput will exceed this kit.

DDR3L interface limits

The DDR3L 240-pin interface tops out at 1333 MHz (PC3L-10600) on this kit, capping theoretical bandwidth below later DDR3L speeds. ECC error correction adds reliability for mission-critical data but does not increase raw throughput. Systems must support unbuffered ECC UDIMMs at 1.35 V or 1.5 V; registered or non-ECC platforms will not accept these modules.

I korthet

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Low-voltage 1.35 V operation reduces power draw
  • 240-pin DIMM form factor fits compatible server slots

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-10600E
Capacity16GB (4 x 4GB)
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 1.35V DDR3L 1333 modules run reliably alongside existing 1.5V DDR3 sticks in the same server?

The kit is rated for both 1.35V and 1.5V operation, so it can match the voltage of your current DDR3 memory when installed in the same system.

How can I confirm the 2Rx8 ECC UDIMM kit is functioning correctly after installation?

Check the BIOS or UEFI to ensure all 16 GB are detected, ECC is shown as active, and the speed reads 1333 MHz; then run a memory diagnostic to verify error-correction logging.

What comes in the box and do I need any extra parts to install the four 240-pin DIMMs?

The package contains the four 4 GB DDR3L 1333 ECC UDIMM modules; no additional hardware is required for installation in compatible 240-pin DIMM slots.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.