Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

A-Tech

A-Tech 16GB (4x4GB) DDR3L 1333 ECC UDIMM 240-Pin 2Rx8 1.35V Server RAM

SKU CH-WBTA-S15G7

A 16 GB quad-channel DDR3L 1333 kit with ECC unbuffered DIMMs for servers and workstations

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Speed DDR3L 1333 (PC3L 10600)

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Low-voltage 1.35 V operation reduces power draw
  • 240-pin DIMM form factor fits compatible server slots

Server DDR3L ECC kit

This 16 GB kit contains four 4 GB unbuffered ECC UDIMMs built for DDR3 and DDR3L servers and workstations. The modules run at 1333 MHz with CL9 latency and operate at 1.35 V, with support for 1.5 V where required. They are not compatible with desktop or laptop computers.

Capacity and headroom

The quad-channel kit provides 16 GB total capacity for multi-threaded server workloads such as virtualization, database caching and file serving. Dual-rank 2Rx8 organization helps fill memory channels efficiently, though the 1333 MHz speed limits bandwidth compared to faster DDR3L grades. Workloads needing more than 16 GB or higher throughput will exceed this kit.

DDR3L interface limits

The DDR3L 240-pin interface tops out at 1333 MHz (PC3L-10600) on this kit, capping theoretical bandwidth below later DDR3L speeds. ECC error correction adds reliability for mission-critical data but does not increase raw throughput. Systems must support unbuffered ECC UDIMMs at 1.35 V or 1.5 V; registered or non-ECC platforms will not accept these modules.

Punti di forza

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Low-voltage 1.35 V operation reduces power draw
  • 240-pin DIMM form factor fits compatible server slots

Caratteristiche tecniche

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-10600E
Capacity16GB (4 x 4GB)
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the 1.35V DDR3L 1333 modules run reliably alongside existing 1.5V DDR3 sticks in the same server?

The kit is rated for both 1.35V and 1.5V operation, so it can match the voltage of your current DDR3 memory when installed in the same system.

How can I confirm the 2Rx8 ECC UDIMM kit is functioning correctly after installation?

Check the BIOS or UEFI to ensure all 16 GB are detected, ECC is shown as active, and the speed reads 1333 MHz; then run a memory diagnostic to verify error-correction logging.

What comes in the box and do I need any extra parts to install the four 240-pin DIMMs?

The package contains the four 4 GB DDR3L 1333 ECC UDIMM modules; no additional hardware is required for installation in compatible 240-pin DIMM slots.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.