Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black desktop duplicator with five horizontal SATA drive slots and four-button control panel

Acumen Disc

Acumen Disc H05-SATA3 1-to-5 SATA Duplicator 600MB/s

SKU CH-355K-CZNMP

Standalone duplicator copies up to five 3.5" or 2.5" SATA drives at 600 MB/s and offers seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 5

Data Transfer Rate 600MB/s

  • Copies five drives simultaneously at 600 MB/s
  • Two duplication modes for quick or full copies
  • Seven erase modes including DoD 5220.22-M standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation needs no host computer or software

1-to-5 SATA Duplicator

The Acumen Disc H05-SATA3 is a standalone duplicator that copies one source SATA drive to up to five target drives simultaneously. It handles both 3.5" and 2.5" SATA hard disks and solid-state drives without requiring adapters. The unit operates independently with no computer or software connection needed for secure duplication.

Slot-load design with 4-button control

Drives insert directly into five front-facing slots for quick swap operation. A simple four-button controller manages all copy and erase functions through an on-board menu. The AC power supply accepts 115-230 V at 50/60 Hz for worldwide voltage compatibility without a separate adapter.

Replaces manual PC-based cloning

This duplicator removes the need to tie up a workstation for sector-by-sector imaging or sanitisation tasks. It delivers up to 600MB/s per slot, quoted as 36GB per minute, and offers seven erase modes including DoD 5220.22-M three-pass and seven-pass standards. The jump is worth it when you regularly image multiple drives or require certified data destruction without host software.

I korthet

  • Copies five drives simultaneously at 600 MB/s
  • Two duplication modes for quick or full copies
  • Seven erase modes including DoD 5220.22-M standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation needs no host computer or software

Specifikationer

BrandAcumen Disc
Part NumberH05-SATA3
TypeHard Drive Duplicator
Target1 to 5
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What SATA interface does the H05-SATA3 duplicator use and what is the maximum copy speed per slot?

The duplicator uses a SATA interface and copies at up to 600MB/s in each of the five slots.

What drive sizes and form factors fit the slot-load bays without an adapter?

Both 3.5" and 2.5" SATA hard drives and SSDs fit directly into the slot-load bays with no adapter required.

How do you start a copy job on the standalone unit and which button sequence is often missed?

Insert the source drive in the first slot and targets in the remaining slots, then use the four-button controller to select System and Files (Quick Copy) or Whole HDD (Full Copy) mode and press Start; the step users often miss is confirming the erase mode before starting a sanitize job.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.