Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Tower duplicator with eleven front-loading SATA drive slots and four-button control panel

Acumen Disc

Acumen Disc H11-SATA3 1 to 11 SATA Duplicator 600MB/s

SKU CH-RXZJ-XX7GP

Standalone duplicator copies up to 11 SATA drives at 600 MB/s with seven erase modes including DoD 5220.22-M standards

  • TypeHard Drive Duplicator
  • Target1 to 11
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 11

Data Transfer Rate 600MB/s

  • Copies 11 drives simultaneously at 600MB/s
  • Two copy modes: quick file copy or full sector duplication
  • Seven erase modes including DoD 5220.22-M three-pass and seven-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation with four-button controller for secure offline use

1-to-11 SATA duplicator for IT teams

The Acumen Disc H11-SATA3 copies up to eleven SATA 3.5 or 2.5 drives at once, reaching 600MB per second per slot. It runs as a standalone unit, so no host computer or software is required during operation.

Two copy modes and seven erase modes

Quick Copy duplicates only essential files for speed, while Full Copy mirrors the entire drive sector by sector. Erase options include DoD 3-pass and 7-pass methods compliant with 5220.22-M standards, plus Secure Erase, Enhanced SSD Erase, and HPA Erase for thorough sanitisation.

Slot-load rack with AC power input

Drives slide directly into the front-loading slots without adapters for either 3.5 or 2.5 form factors. The unit accepts 115 to 230 V AC at 50 or 60 Hz, making it ready for standard office or lab power circuits.

I korthet

  • Copies 11 drives simultaneously at 600MB/s
  • Two copy modes: quick file copy or full sector duplication
  • Seven erase modes including DoD 5220.22-M three-pass and seven-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation with four-button controller for secure offline use

Specifikationer

BrandAcumen Disc
Part NumberH11-SATA3
TypeHard Drive Duplicator
Target1 to 11
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Do the eleven drive slots need any periodic cleaning or part replacement?

The unit uses simple slot-load bays with no tool-free trays or moving rails, so routine maintenance is limited to keeping the slots free of dust; no user-replaceable parts are specified.

What limits copy speed when all eleven bays run continuously at 600MB/s?

The duplicator sustains 600MB/s per slot (36GB/min) across all eleven targets, so the first bottleneck is the source drive’s own maximum sustained transfer rate.

How much heat and noise does the duplicator produce during an all-day copy job?

It runs from a 115–230 V 50/60 Hz supply with no fan specifications published; the chassis is designed for continuous standalone operation without additional cooling requirements.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.