Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular silver ASIC miner with two front fans and Ethernet port

AFRNDK

AFRNDK Whatsminer M50S 126TH/S 3276W ASIC mining hardware

SKU CH-65VB-YKBEV

SHA-256 ASIC miner delivering 126 TH/s at 3276 W with 80 dB noise, 220 V input and 5 nm chips

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate126TH/S
  • Noise level80dB
  • Delivers 126 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 3276 W at the wall for efficient operation
  • Runs on 220 V input to protect hardware from damage
  • Compact 125 x 225 x 425 mm frame fits dense racks
  • Operates between 5 °C and 45 °C with 5 % to 95 % humidity

Whatsminer M50S SHA-256 ASIC Miner

The Whatsminer M50S is a Bitcoin ASIC miner built on a 5nm process and rated at 126 TH/s. It draws 3276 W and connects to the network through a single Ethernet port. The unit measures 125 x 225 x 425 mm and uses two fans that produce approximately 80 dB of noise. It is intended for operators running SHA-256 workloads in a dedicated facility.

220 V Power Requirement and Environment

The miner requires a 220 V supply; applying an incorrect voltage can cause permanent damage. Confirm that your electrical infrastructure can deliver the full 3276 W continuously and that the site stays within the 5 to 45 °C operating temperature range and 5 to 95 % relative humidity. Adequate airflow must be provided to handle the heat output of the dual-fan cooling system.

Included Accessories and Software

The product ships as a complete mining machine with no separate controller or additional cables mentioned in the specifications. Factory firmware is pre-installed and managed through the Ethernet interface, so no extra software installation is required to begin hashing on the Bitcoin network.

I korthet

  • Delivers 126 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 3276 W at the wall for efficient operation
  • Runs on 220 V input to protect hardware from damage
  • Compact 125 x 225 x 425 mm frame fits dense racks
  • Operates between 5 °C and 45 °C with 5 % to 95 % humidity

Specifikationer

BrandWhatsminer
SeriesM50S
ModelM50S
TypeMining Machine/Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate126TH/S
Noise level80dB
Power Consumption3276W

Frågor om den här produkten

What power supply voltage does the Whatsminer M50S require to operate safely?

The miner requires a 220V input. Supplying the wrong voltage can damage the hardware, so confirm your facility provides 220V before installation.

How much heat and noise should I plan for when siting this unit?

It draws 3276W and runs at 80dB with two fans. The operating temperature range is 5 to 45°C and humidity 5 to 95%, so provide adequate airflow and cooling in the chosen location.

What physical space and network connection does the M50S need?

Dimensions are 125 x 225 x 425mm. It connects via Ethernet, so ensure you have a wired network drop and enough rack or shelf clearance for the chassis.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.