Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Rectangular silver ASIC miner with two front fans and Ethernet port

AFRNDK

AFRNDK Whatsminer M50S 126TH/S 3276W ASIC mining hardware

SKU CH-65VB-YKBEV

SHA-256 ASIC miner delivering 126 TH/s at 3276 W with 80 dB noise, 220 V input and 5 nm chips

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate126TH/S
  • Noise level80dB
  • Delivers 126 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 3276 W at the wall for efficient operation
  • Runs on 220 V input to protect hardware from damage
  • Compact 125 x 225 x 425 mm frame fits dense racks
  • Operates between 5 °C and 45 °C with 5 % to 95 % humidity

Whatsminer M50S SHA-256 ASIC Miner

The Whatsminer M50S is a Bitcoin ASIC miner built on a 5nm process and rated at 126 TH/s. It draws 3276 W and connects to the network through a single Ethernet port. The unit measures 125 x 225 x 425 mm and uses two fans that produce approximately 80 dB of noise. It is intended for operators running SHA-256 workloads in a dedicated facility.

220 V Power Requirement and Environment

The miner requires a 220 V supply; applying an incorrect voltage can cause permanent damage. Confirm that your electrical infrastructure can deliver the full 3276 W continuously and that the site stays within the 5 to 45 °C operating temperature range and 5 to 95 % relative humidity. Adequate airflow must be provided to handle the heat output of the dual-fan cooling system.

Included Accessories and Software

The product ships as a complete mining machine with no separate controller or additional cables mentioned in the specifications. Factory firmware is pre-installed and managed through the Ethernet interface, so no extra software installation is required to begin hashing on the Bitcoin network.

Najważniejsze cechy

  • Delivers 126 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 3276 W at the wall for efficient operation
  • Runs on 220 V input to protect hardware from damage
  • Compact 125 x 225 x 425 mm frame fits dense racks
  • Operates between 5 °C and 45 °C with 5 % to 95 % humidity

Specyfikacja

BrandWhatsminer
SeriesM50S
ModelM50S
TypeMining Machine/Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate126TH/S
Noise level80dB
Power Consumption3276W

Pytania dotyczące tego produktu

What power supply voltage does the Whatsminer M50S require to operate safely?

The miner requires a 220V input. Supplying the wrong voltage can damage the hardware, so confirm your facility provides 220V before installation.

How much heat and noise should I plan for when siting this unit?

It draws 3276W and runs at 80dB with two fans. The operating temperature range is 5 to 45°C and humidity 5 to 95%, so provide adequate airflow and cooling in the chosen location.

What physical space and network connection does the M50S need?

Dimensions are 125 x 225 x 425mm. It connects via Ethernet, so ensure you have a wired network drop and enough rack or shelf clearance for the chassis.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.