Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Antminer L3++ Scrypt ASIC miner in compact alloy housing with four hashboards

Antminer

Antminer L3++ 580MH/s Scrypt ASIC mining hardware

SKU CH-SKD4-SF9P2

Scrypt ASIC miner delivering 580 MH/s at 942 W for Litecoin and Dogecoin

  • Delivers 580 MH/s Scrypt hashrate for efficient Litecoin and Dogecoin mining
  • Draws 942 W with ±10 % tolerance for predictable power budgeting
  • Four hashboards each with dual PCI-E 6-pin feeds ensure stable current delivery
  • Snap-on data-cable connectors maintain tight contact for reliable signal integrity
  • Factory pre-test and protective foam packing reduce transit damage risk

Scrypt ASIC Miner for Litecoin and Dogecoin

This Antminer L3++ delivers a hash rate of 580 MH/s on the Scrypt algorithm, making it suitable for mining Litecoin, Dogecoin and other coins that share the same proof-of-work. It draws 942 W of power with a tolerance of plus or minus ten percent. The unit is built for operators who want a dedicated Scrypt machine rather than a general-purpose GPU rig.

Upgraded replacement for earlier L3 models

The L3++ is the optimized successor to the L3+ and raises the single-unit hashrate by about 90 MH/s. Miners running older L3 or L3+ hardware can consider the jump when the extra throughput justifies the power budget and when their infrastructure already supports the required 6-pin PCIe connectors.

Four hashboards with snap-on data cables

Inside the alloy chassis sit four hashboards, each equipped with two 6-pin PCIe power inputs and four snap-on data cables linking to the controller. The snap-on design keeps contacts tight for stable signal transmission. Before shipment every unit is debugged and packed with bubble wrap and EPE foam to reduce transit damage. Installers should verify that all power cables are fully seated and that the controller recognises every hashboard on first boot.

I korthet

  • Delivers 580 MH/s Scrypt hashrate for efficient Litecoin and Dogecoin mining
  • Draws 942 W with ±10 % tolerance for predictable power budgeting
  • Four hashboards each with dual PCI-E 6-pin feeds ensure stable current delivery
  • Snap-on data-cable connectors maintain tight contact for reliable signal integrity
  • Factory pre-test and protective foam packing reduce transit damage risk

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How many PCI-E 6-pin connectors does the Antminer L3++ need and how are they arranged?

The unit has four hashboards, each with two PCI-E 6-pin interfaces, so eight connectors in total must be plugged in for full power delivery.

What is the correct sequence for attaching the data cables to the controller on the Antminer L3++?

Each hashboard uses four data cables that snap onto the controller; connect all four per board before powering on, otherwise the corresponding hashboard will not be recognised.

How often should the internal fans and heatsinks of the Antminer L3++ be cleaned to maintain the 580 MH/s hash rate?

Dust buildup raises temperatures and can throttle the 580 MH/s output; clean fans and heatsinks every few weeks in typical environments, more often in dusty areas.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.