Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Antminer L3++ Scrypt ASIC miner in compact alloy housing with four hashboards

Antminer

Antminer L3++ 580MH/s Scrypt ASIC mining hardware

SKU CH-SKD4-SF9P2

Scrypt ASIC miner delivering 580 MH/s at 942 W for Litecoin and Dogecoin

  • Delivers 580 MH/s Scrypt hashrate for efficient Litecoin and Dogecoin mining
  • Draws 942 W with ±10 % tolerance for predictable power budgeting
  • Four hashboards each with dual PCI-E 6-pin feeds ensure stable current delivery
  • Snap-on data-cable connectors maintain tight contact for reliable signal integrity
  • Factory pre-test and protective foam packing reduce transit damage risk

Scrypt ASIC Miner for Litecoin and Dogecoin

This Antminer L3++ delivers a hash rate of 580 MH/s on the Scrypt algorithm, making it suitable for mining Litecoin, Dogecoin and other coins that share the same proof-of-work. It draws 942 W of power with a tolerance of plus or minus ten percent. The unit is built for operators who want a dedicated Scrypt machine rather than a general-purpose GPU rig.

Upgraded replacement for earlier L3 models

The L3++ is the optimized successor to the L3+ and raises the single-unit hashrate by about 90 MH/s. Miners running older L3 or L3+ hardware can consider the jump when the extra throughput justifies the power budget and when their infrastructure already supports the required 6-pin PCIe connectors.

Four hashboards with snap-on data cables

Inside the alloy chassis sit four hashboards, each equipped with two 6-pin PCIe power inputs and four snap-on data cables linking to the controller. The snap-on design keeps contacts tight for stable signal transmission. Before shipment every unit is debugged and packed with bubble wrap and EPE foam to reduce transit damage. Installers should verify that all power cables are fully seated and that the controller recognises every hashboard on first boot.

Pontos fortes

  • Delivers 580 MH/s Scrypt hashrate for efficient Litecoin and Dogecoin mining
  • Draws 942 W with ±10 % tolerance for predictable power budgeting
  • Four hashboards each with dual PCI-E 6-pin feeds ensure stable current delivery
  • Snap-on data-cable connectors maintain tight contact for reliable signal integrity
  • Factory pre-test and protective foam packing reduce transit damage risk

Especificações

Ainda não há especificações publicadas para este artigo.

Perguntas sobre este artigo

How many PCI-E 6-pin connectors does the Antminer L3++ need and how are they arranged?

The unit has four hashboards, each with two PCI-E 6-pin interfaces, so eight connectors in total must be plugged in for full power delivery.

What is the correct sequence for attaching the data cables to the controller on the Antminer L3++?

Each hashboard uses four data cables that snap onto the controller; connect all four per board before powering on, otherwise the corresponding hashboard will not be recognised.

How often should the internal fans and heatsinks of the Antminer L3++ be cleaned to maintain the 580 MH/s hash rate?

Dust buildup raises temperatures and can throttle the 580 MH/s output; clean fans and heatsinks every few weeks in typical environments, more often in dusty areas.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.