Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black fully modular ATX 3.1 power supply with 135mm striped axial fan

ASRock

ASRock PG-1300G 1300 W ATX 3.1 power supply

SKU CH-6ZK9-YTVRW MPN PG-1300G

Delivers 1300 W via a fully modular ATX 3.1 and PCIe 5.1 design with a native 12V-2x6 connector, 135 mm FDB fan, Cybenetics Gold efficiency and A noise rating.

  • ColorBlack
  • TypeATX3.1 & PCIe5.1
  • Maximum Power1300 W
  • Fans135mm Striped Axial FDB Fan
  • ModularFull Modular
  • Energy-EfficientCybenetics Gold

Options 1300W

  • Delivers 1300 W for high-end builds
  • ATX 3.1 and PCIe 5.1 ready for modern GPUs
  • 80 PLUS Gold and Cybenetics Gold efficiency
  • 135 mm FDB fan with iCool semi-passive mode
  • Native 12V-2x6 connector with TempGuard monitoring

1300 W ATX 3.1 power supply

The ASRock PG-1300G delivers 1300 W of fully modular power certified to ATX 3.1 and PCIe 5.1 standards. It carries 80 PLUS Gold and Cybenetics Gold efficiency ratings plus a Cybenetics A noise rating. Japanese capacitors and a 135 mm striped axial FDB fan with iCool intelligent control provide reliable operation for high-performance builds.

ATX 3.1 and PCIe 5.1 compatibility check

Verify that your motherboard and graphics card support the ATX 3.1 and PCIe 5.1 specifications before ordering. The unit includes a native 12V-2x6 connector with dual-colour design and TempGuard temperature monitoring. Ensure your case has clearance for a full-modular ATX power supply and that the +5V Boost switch setting matches your component requirements.

Full modular cabling for high-wattage builds

The fully modular cable set lets you connect only the leads your build needs, reducing clutter and improving airflow. The 12V-2x6 connector supports up to 220 % power excursion for modern GPUs, while the +5V Boost mode regulates the rail to approximately 5.15 V when enabled. iCool mode keeps the fan off at low to medium loads, freeing up acoustic headroom for other components.

I korthet

  • Delivers 1300 W for high-end builds
  • ATX 3.1 and PCIe 5.1 ready for modern GPUs
  • 80 PLUS Gold and Cybenetics Gold efficiency
  • 135 mm FDB fan with iCool semi-passive mode
  • Native 12V-2x6 connector with TempGuard monitoring

Specifikationer

BrandASRock
ModelPG-1300G
ColorBlack
TypeATX3.1 & PCIe5.1
Maximum Power1300 W
Fans135mm Striped Axial FDB Fan
ModularFull Modular
Energy-EfficientCybenetics Gold
PSU Noise LevelCybenetics A
Fraktvikt4.49 kg
Paketstorlek318 × 241 × 127 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does this power supply include the 12V-2x6 connector required for modern graphics cards?

Yes, the PG-1300G ships with a native 12V-2x6 cable that meets the ATX 3.1 and PCIe 5.1 specifications, so it connects directly to current-generation GPUs without an adapter.

Will the fan stay silent during light desktop work?

The iCOOL mode keeps the 135 mm FDB fan completely off at low and medium loads, only spinning up when the unit detects higher demand or rising internal temperatures.

What efficiency ratings does this unit carry?

It holds both 80 PLUS Gold and Cybenetics Gold certifications, plus a Cybenetics Lambda A noise rating, confirming high energy efficiency and quiet operation under load.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.