Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black fully modular ATX 3.1 power supply with 135mm striped axial fan

ASRock

ASRock PG-1300G 1300 W ATX 3.1 power supply

SKU CH-6ZK9-YTVRW MPN PG-1300G

Delivers 1300 W via a fully modular ATX 3.1 and PCIe 5.1 design with a native 12V-2x6 connector, 135 mm FDB fan, Cybenetics Gold efficiency and A noise rating.

  • ColorBlack
  • TypeATX3.1 & PCIe5.1
  • Maximum Power1300 W
  • Fans135mm Striped Axial FDB Fan
  • ModularFull Modular
  • Energy-EfficientCybenetics Gold

Options 1300W

  • Delivers 1300 W for high-end builds
  • ATX 3.1 and PCIe 5.1 ready for modern GPUs
  • 80 PLUS Gold and Cybenetics Gold efficiency
  • 135 mm FDB fan with iCool semi-passive mode
  • Native 12V-2x6 connector with TempGuard monitoring

1300 W ATX 3.1 power supply

The ASRock PG-1300G delivers 1300 W of fully modular power certified to ATX 3.1 and PCIe 5.1 standards. It carries 80 PLUS Gold and Cybenetics Gold efficiency ratings plus a Cybenetics A noise rating. Japanese capacitors and a 135 mm striped axial FDB fan with iCool intelligent control provide reliable operation for high-performance builds.

ATX 3.1 and PCIe 5.1 compatibility check

Verify that your motherboard and graphics card support the ATX 3.1 and PCIe 5.1 specifications before ordering. The unit includes a native 12V-2x6 connector with dual-colour design and TempGuard temperature monitoring. Ensure your case has clearance for a full-modular ATX power supply and that the +5V Boost switch setting matches your component requirements.

Full modular cabling for high-wattage builds

The fully modular cable set lets you connect only the leads your build needs, reducing clutter and improving airflow. The 12V-2x6 connector supports up to 220 % power excursion for modern GPUs, while the +5V Boost mode regulates the rail to approximately 5.15 V when enabled. iCool mode keeps the fan off at low to medium loads, freeing up acoustic headroom for other components.

Pluspunten

  • Delivers 1300 W for high-end builds
  • ATX 3.1 and PCIe 5.1 ready for modern GPUs
  • 80 PLUS Gold and Cybenetics Gold efficiency
  • 135 mm FDB fan with iCool semi-passive mode
  • Native 12V-2x6 connector with TempGuard monitoring

Specificaties

BrandASRock
ModelPG-1300G
ColorBlack
TypeATX3.1 & PCIe5.1
Maximum Power1300 W
Fans135mm Striped Axial FDB Fan
ModularFull Modular
Energy-EfficientCybenetics Gold
PSU Noise LevelCybenetics A
Verzendgewicht4.49 kg
Pakketafmetingen318 × 241 × 127 mm

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does this power supply include the 12V-2x6 connector required for modern graphics cards?

Yes, the PG-1300G ships with a native 12V-2x6 cable that meets the ATX 3.1 and PCIe 5.1 specifications, so it connects directly to current-generation GPUs without an adapter.

Will the fan stay silent during light desktop work?

The iCOOL mode keeps the 135 mm FDB fan completely off at low and medium loads, only spinning up when the unit detects higher demand or rising internal temperatures.

What efficiency ratings does this unit carry?

It holds both 80 PLUS Gold and Cybenetics Gold certifications, plus a Cybenetics Lambda A noise rating, confirming high energy efficiency and quiet operation under load.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.