Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Square black 60mm case fan with wire leads

Fans

Fans 2406KL-04W-B36 case fan 60x60x15mm 12V 0.14A 1500rpm 12dBA 30.3CFM

SKU CH-RJBN-2GHAX MPN 2406KL-04W-B36

A 60 mm ball-bearing case fan moves 30.3 CFM at 1500 rpm while producing only 12 dBA

  • Quiet operation at 12dBA for silent builds
  • 1500 rpm delivers 30.3 CFM airflow
  • Ball bearing ensures long service life
  • Runs on 12V drawing only 0.14A
  • Compact 60x60x15mm fits tight spaces

Compact 60 mm Axial Fan

The 60 by 60 by 15 millimetre fan runs on 12 volts and draws 0.14 amps while spinning at 1500 rpm with a tolerance of plus or minus ten percent. It delivers 30.3 CFM of airflow at a rated noise level of 12 dBA making it suitable for tight enclosures that need quiet cooling.

Ball Bearing with Wide Voltage Range

A ball bearing supports the rotor for consistent rotation and longer service life in continuous operation. The operating voltage window spans 4.5 to 13.8 volts so the fan can be undervolted for silence or run at full rated speed without a separate controller.

Replaces 60 mm Sleeve Bearing Units

Builders swapping out worn sleeve bearing fans gain a more durable bearing and a lower noise floor at the same mounting footprint. The upgrade is worthwhile when the existing fan has become audible or when the system demands the wider input voltage range for variable speed control.

I korthet

  • Quiet operation at 12dBA for silent builds
  • 1500 rpm delivers 30.3 CFM airflow
  • Ball bearing ensures long service life
  • Runs on 12V drawing only 0.14A
  • Compact 60x60x15mm fits tight spaces

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Does the 3-pin connector on the 2406KL-04W-B36 support PWM speed control?

The 2406KL-04W-B36 uses a 3-pin connector that provides voltage-based speed control and tachometer feedback; it does not accept a 4-pin PWM signal.

Will the 60 mm by 60 mm by 15 mm frame fit a standard 60 mm fan mount?

Yes, the 60 x 60 x 15 mm dimensions match the standard 60 mm mounting pattern with 50 mm screw-hole spacing.

How do I connect the three wires correctly so the fan reports speed to the motherboard?

Connect the yellow wire to the motherboard fan header tach pin; reversing the red and black power wires will prevent the fan from spinning.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.