نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Fans

Fans 2406KL-04W-B36 case fan 60x60x15mm 12V 0.14A 1500rpm 12dBA 30.3CFM

SKU CH-RJBN-2GHAX MPN 2406KL-04W-B36

A 60 mm ball-bearing case fan moves 30.3 CFM at 1500 rpm while producing only 12 dBA

  • Quiet operation at 12dBA for silent builds
  • 1500 rpm delivers 30.3 CFM airflow
  • Ball bearing ensures long service life
  • Runs on 12V drawing only 0.14A
  • Compact 60x60x15mm fits tight spaces

Compact 60 mm Axial Fan

The 60 by 60 by 15 millimetre fan runs on 12 volts and draws 0.14 amps while spinning at 1500 rpm with a tolerance of plus or minus ten percent. It delivers 30.3 CFM of airflow at a rated noise level of 12 dBA making it suitable for tight enclosures that need quiet cooling.

Ball Bearing with Wide Voltage Range

A ball bearing supports the rotor for consistent rotation and longer service life in continuous operation. The operating voltage window spans 4.5 to 13.8 volts so the fan can be undervolted for silence or run at full rated speed without a separate controller.

Replaces 60 mm Sleeve Bearing Units

Builders swapping out worn sleeve bearing fans gain a more durable bearing and a lower noise floor at the same mounting footprint. The upgrade is worthwhile when the existing fan has become audible or when the system demands the wider input voltage range for variable speed control.

أبرز المميزات

  • Quiet operation at 12dBA for silent builds
  • 1500 rpm delivers 30.3 CFM airflow
  • Ball bearing ensures long service life
  • Runs on 12V drawing only 0.14A
  • Compact 60x60x15mm fits tight spaces

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Does the 3-pin connector on the 2406KL-04W-B36 support PWM speed control?

The 2406KL-04W-B36 uses a 3-pin connector that provides voltage-based speed control and tachometer feedback; it does not accept a 4-pin PWM signal.

Will the 60 mm by 60 mm by 15 mm frame fit a standard 60 mm fan mount?

Yes, the 60 x 60 x 15 mm dimensions match the standard 60 mm mounting pattern with 50 mm screw-hole spacing.

How do I connect the three wires correctly so the fan reports speed to the motherboard?

Connect the yellow wire to the motherboard fan header tach pin; reversing the red and black power wires will prevent the fan from spinning.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.