Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
FormulaMod tube bending kit with 45 90 180 degree molds cutter grinder silicone tube for OD16mm rigid tubing

FormulaMod

FormulaMod Tube Bending Kit OD16 45/90/180° Molds Cutter Grinder Silicone Tube ID12mm

SKU CH-3JBX-K1RZ2

Complete kit for bending 16 mm OD hard tubing with 45°, 90° and 180° molds plus cutter, grinder and 12 mm ID silicone insert

  • TypeCombo Kit

Option For OD16 hard tube

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

FormulaMod OD16 Bending Kit

This FormulaMod kit equips builders to shape rigid tubing with a 16 mm outer diameter for custom liquid-cooling loops. It bundles 45°, 90° and 180° bending molds, a silicone insert with a 12 mm inner diameter, a dedicated cutter and a grinding tool. The set targets enthusiasts assembling hard-tube runs who want a single package for cutting, deburring and forming bends.

Heat-first workflow prevents mold damage

The instructions require heating the tubing before placing it into the chosen mold; the molds themselves must never be heated directly. Following this sequence lets the material conform to the mold radius without stressing the tooling, yielding repeatable bends during extended build sessions. Skipping the heating step or applying heat to the mold risks deformed tubing and damaged forms.

Cutter limited to softer tube materials

The supplied cutter handles common PETG and similar plastics but is explicitly not recommended for acrylic tubing because it may lack sufficient strength. Builders planning acrylic runs should source a heavier-duty cutter separately. The silicone insert slides inside the tube during bending to prevent collapse, and the grinder cleans cut ends for leak-free fitting seating.

I korthet

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

Specifikationer

TypeCombo Kit

Andra versioner av den här modellen

1 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much heat does the kit generate during a full day of bending 16 mm OD tubing?

The kit itself produces no heat; you supply an external heat source to soften the tube before placing it in the 45°, 90° or 180° molds.

What tube stock must I already have for the included cutter, molds and 12 mm ID silicone insert to work?

You need rigid tubing with a 16 mm outer diameter; the cutter is not recommended for acrylic tube.

Will the 12 mm ID silicone tube and grinding tool fit the 16 mm OD hard tube I plan to keep from my last build?

Yes, the silicone insert and grinder are sized for 16 mm OD tube, so they work with existing stock of that diameter.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.