Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
FormulaMod tube bending kit with 45 90 180 degree molds cutter grinder silicone tube for OD16mm rigid tubing

FormulaMod

FormulaMod Tube Bending Kit OD16 45/90/180° Molds Cutter Grinder Silicone Tube ID12mm

SKU CH-3JBX-K1RZ2

Complete kit for bending 16 mm OD hard tubing with 45°, 90° and 180° molds plus cutter, grinder and 12 mm ID silicone insert

  • TypeCombo Kit

Option For OD16 hard tube

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

FormulaMod OD16 Bending Kit

This FormulaMod kit equips builders to shape rigid tubing with a 16 mm outer diameter for custom liquid-cooling loops. It bundles 45°, 90° and 180° bending molds, a silicone insert with a 12 mm inner diameter, a dedicated cutter and a grinding tool. The set targets enthusiasts assembling hard-tube runs who want a single package for cutting, deburring and forming bends.

Heat-first workflow prevents mold damage

The instructions require heating the tubing before placing it into the chosen mold; the molds themselves must never be heated directly. Following this sequence lets the material conform to the mold radius without stressing the tooling, yielding repeatable bends during extended build sessions. Skipping the heating step or applying heat to the mold risks deformed tubing and damaged forms.

Cutter limited to softer tube materials

The supplied cutter handles common PETG and similar plastics but is explicitly not recommended for acrylic tubing because it may lack sufficient strength. Builders planning acrylic runs should source a heavier-duty cutter separately. The silicone insert slides inside the tube during bending to prevent collapse, and the grinder cleans cut ends for leak-free fitting seating.

Pontos fortes

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

Especificações

TypeCombo Kit

Outras versões deste modelo

Mais 1 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How much heat does the kit generate during a full day of bending 16 mm OD tubing?

The kit itself produces no heat; you supply an external heat source to soften the tube before placing it in the 45°, 90° or 180° molds.

What tube stock must I already have for the included cutter, molds and 12 mm ID silicone insert to work?

You need rigid tubing with a 16 mm outer diameter; the cutter is not recommended for acrylic tube.

Will the 12 mm ID silicone tube and grinding tool fit the 16 mm OD hard tube I plan to keep from my last build?

Yes, the silicone insert and grinder are sized for 16 mm OD tube, so they work with existing stock of that diameter.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.