暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
FormulaMod tube bending kit with 45 90 180 degree molds cutter grinder silicone tube for OD16mm rigid tubing

FormulaMod

FormulaMod Tube Bending Kit OD16 45/90/180° Molds Cutter Grinder Silicone Tube ID12mm

SKU CH-3JBX-K1RZ2

Complete kit for bending 16 mm OD hard tubing with 45°, 90° and 180° molds plus cutter, grinder and 12 mm ID silicone insert

  • TypeCombo Kit

Option For OD16 hard tube

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

FormulaMod OD16 Bending Kit

This FormulaMod kit equips builders to shape rigid tubing with a 16 mm outer diameter for custom liquid-cooling loops. It bundles 45°, 90° and 180° bending molds, a silicone insert with a 12 mm inner diameter, a dedicated cutter and a grinding tool. The set targets enthusiasts assembling hard-tube runs who want a single package for cutting, deburring and forming bends.

Heat-first workflow prevents mold damage

The instructions require heating the tubing before placing it into the chosen mold; the molds themselves must never be heated directly. Following this sequence lets the material conform to the mold radius without stressing the tooling, yielding repeatable bends during extended build sessions. Skipping the heating step or applying heat to the mold risks deformed tubing and damaged forms.

Cutter limited to softer tube materials

The supplied cutter handles common PETG and similar plastics but is explicitly not recommended for acrylic tubing because it may lack sufficient strength. Builders planning acrylic runs should source a heavier-duty cutter separately. The silicone insert slides inside the tube during bending to prevent collapse, and the grinder cleans cut ends for leak-free fitting seating.

特長

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

仕様

TypeCombo Kit

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much heat does the kit generate during a full day of bending 16 mm OD tubing?

The kit itself produces no heat; you supply an external heat source to soften the tube before placing it in the 45°, 90° or 180° molds.

What tube stock must I already have for the included cutter, molds and 12 mm ID silicone insert to work?

You need rigid tubing with a 16 mm outer diameter; the cutter is not recommended for acrylic tube.

Will the 12 mm ID silicone tube and grinding tool fit the 16 mm OD hard tube I plan to keep from my last build?

Yes, the silicone insert and grinder are sized for 16 mm OD tube, so they work with existing stock of that diameter.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。