저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
FormulaMod tube bending kit with 45 90 180 degree molds cutter grinder silicone tube for OD16mm rigid tubing

FormulaMod

FormulaMod Tube Bending Kit OD16 45/90/180° Molds Cutter Grinder Silicone Tube ID12mm

SKU CH-3JBX-K1RZ2

Complete kit for bending 16 mm OD hard tubing with 45°, 90° and 180° molds plus cutter, grinder and 12 mm ID silicone insert

  • TypeCombo Kit

Option For OD16 hard tube

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

FormulaMod OD16 Bending Kit

This FormulaMod kit equips builders to shape rigid tubing with a 16 mm outer diameter for custom liquid-cooling loops. It bundles 45°, 90° and 180° bending molds, a silicone insert with a 12 mm inner diameter, a dedicated cutter and a grinding tool. The set targets enthusiasts assembling hard-tube runs who want a single package for cutting, deburring and forming bends.

Heat-first workflow prevents mold damage

The instructions require heating the tubing before placing it into the chosen mold; the molds themselves must never be heated directly. Following this sequence lets the material conform to the mold radius without stressing the tooling, yielding repeatable bends during extended build sessions. Skipping the heating step or applying heat to the mold risks deformed tubing and damaged forms.

Cutter limited to softer tube materials

The supplied cutter handles common PETG and similar plastics but is explicitly not recommended for acrylic tubing because it may lack sufficient strength. Builders planning acrylic runs should source a heavier-duty cutter separately. The silicone insert slides inside the tube during bending to prevent collapse, and the grinder cleans cut ends for leak-free fitting seating.

주요 특징

  • Complete 16 mm hard-tube bending kit with three angle molds
  • Internal 12 mm silicone insert prevents collapse during tight bends
  • Integrated cutter and grinder prepare tube ends in one set
  • Heat tube first, then form in mold — never heat the mold directly
  • Cutter designed for PETG or similar tubing, not acrylic

사양

TypeCombo Kit

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much heat does the kit generate during a full day of bending 16 mm OD tubing?

The kit itself produces no heat; you supply an external heat source to soften the tube before placing it in the 45°, 90° or 180° molds.

What tube stock must I already have for the included cutter, molds and 12 mm ID silicone insert to work?

You need rigid tubing with a 16 mm outer diameter; the cutter is not recommended for acrylic tube.

Will the 12 mm ID silicone tube and grinding tool fit the 16 mm OD hard tube I plan to keep from my last build?

Yes, the silicone insert and grinder are sized for 16 mm OD tube, so they work with existing stock of that diameter.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.