Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two matte black low-profile DDR5 sticks, 33mm tall, with racing-stripe heatspreaders

G.SKILL

G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 5600 CL30 desktop RAM F5-5600J3036D16GX2-RS5K

SKU CH-JJ71-TRXFJ MPN F5-5600J3036D16GX2-RS5K

Dual-channel 32GB DDR5 kit at 5600 MT/s with CL30 timing, 1.25V operation and 33mm low-profile heat spreaders for compact builds

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL30
  • Timing30-36-36-89
  • Voltage1.25V

Capacity 32GB (2 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL30

Color Black

  • 32 GB dual-channel capacity for high-performance workloads
  • DDR5 5600 speed with CL30 latency for responsive gaming
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers
  • Intel XMP 3.0 profile enables one-click overclocking

Ripjaws S5 32GB DDR5 5600 Kit

This 32GB dual-channel kit consists of two 16GB unbuffered DIMMs rated at DDR5 5600 with a CL30 30-36-36-89 timing profile. Hand-screened ICs and a 1.25V operating voltage target stability for enthusiast desktop builds.

Low-profile 33mm height for tight clearances

The 33mm matte black aluminium heatspreader fits beneath large CPU coolers and inside compact chassis where taller modules would interfere. Builders using standard-height coolers or spacious cases gain no extra benefit from the reduced height.

Intel XMP 3.0 profile at CL30 1.25V

The single specification that decides fit is the XMP 3.0 profile delivering DDR5 5600 at CL30 with 1.25V; if your platform cannot enable XMP 3.0 or requires a different voltage, this kit will not run at its rated speed.

I korthet

  • 32 GB dual-channel capacity for high-performance workloads
  • DDR5 5600 speed with CL30 latency for responsive gaming
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers
  • Intel XMP 3.0 profile enables one-click overclocking

Specifikationer

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-5600J3036D16GX2-RS5K
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL30
Timing30-36-36-89
Voltage1.25V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseHigh Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z590 / Intel Z690
Fraktvikt0.12 kg
Paketstorlek216 × 140 × 16 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What DDR5 speed and peak bandwidth does this kit run at?

The kit is rated for DDR5 5600, which corresponds to a PC5 44800 peak transfer rate.

How tall are the modules and will they clear large CPU coolers?

Each module measures 33 mm high, a low-profile height designed to fit under most large air coolers.

How do I enable the rated 5600 MT/s speed and CL30 timings?

Enable the Intel XMP 3.0 profile in the motherboard BIOS; the kit will otherwise boot at the default SPD speed.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.