Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two matte black low-profile DDR5 sticks, 33mm tall, with racing-stripe heatspreaders

G.SKILL

G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 5600 CL30 desktop RAM F5-5600J3036D16GX2-RS5K

SKU CH-JJ71-TRXFJ MPN F5-5600J3036D16GX2-RS5K

Dual-channel 32GB DDR5 kit at 5600 MT/s with CL30 timing, 1.25V operation and 33mm low-profile heat spreaders for compact builds

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL30
  • Timing30-36-36-89
  • Voltage1.25V

Capacity 32GB (2 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL30

Color Black

  • 32 GB dual-channel capacity for high-performance workloads
  • DDR5 5600 speed with CL30 latency for responsive gaming
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers
  • Intel XMP 3.0 profile enables one-click overclocking

Ripjaws S5 32GB DDR5 5600 Kit

This 32GB dual-channel kit consists of two 16GB unbuffered DIMMs rated at DDR5 5600 with a CL30 30-36-36-89 timing profile. Hand-screened ICs and a 1.25V operating voltage target stability for enthusiast desktop builds.

Low-profile 33mm height for tight clearances

The 33mm matte black aluminium heatspreader fits beneath large CPU coolers and inside compact chassis where taller modules would interfere. Builders using standard-height coolers or spacious cases gain no extra benefit from the reduced height.

Intel XMP 3.0 profile at CL30 1.25V

The single specification that decides fit is the XMP 3.0 profile delivering DDR5 5600 at CL30 with 1.25V; if your platform cannot enable XMP 3.0 or requires a different voltage, this kit will not run at its rated speed.

Puntos fuertes

  • 32 GB dual-channel capacity for high-performance workloads
  • DDR5 5600 speed with CL30 latency for responsive gaming
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers
  • Intel XMP 3.0 profile enables one-click overclocking

Especificaciones

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-5600J3036D16GX2-RS5K
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL30
Timing30-36-36-89
Voltage1.25V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseHigh Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z590 / Intel Z690
Peso de envío0.12 kg
Dimensiones del paquete216 × 140 × 16 mm

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What DDR5 speed and peak bandwidth does this kit run at?

The kit is rated for DDR5 5600, which corresponds to a PC5 44800 peak transfer rate.

How tall are the modules and will they clear large CPU coolers?

Each module measures 33 mm high, a low-profile height designed to fit under most large air coolers.

How do I enable the rated 5600 MT/s speed and CL30 timings?

Enable the Intel XMP 3.0 profile in the motherboard BIOS; the kit will otherwise boot at the default SPD speed.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.