HUANANZHI
HUANANZHI X99 F8D PLUS LGA 2011-3 Intel motherboard with dual Xeon E5-2690 V3
Dual-socket LGA 2011-3 board with two Xeon E5-2690 V3 CPUs, 8 DDR4 slots, 10 SATA ports, dual M.2 and dual gigabit Ethernet
- CPU Socket TypeLGA 2011
- Dual Xeon E5-2690 V3 processors deliver 24 cores and 24 threads for parallel work
- Eight DDR4 slots support up to 64 GB per module in quad-channel mode
- Two M.2 slots provide NVMe x4 and SATA x4 storage options
- Ten SATA 6 Gb/s ports allow large drive arrays
- 12-layer PCB with 12-phase power feeds dual 135 W CPUs
HUANANZHI X99 F8D PLUS Dual Xeon E5-2690 V3
This kit pairs an E-ATX X99 motherboard with two Xeon E5-2690 V3 processors. Each CPU delivers 12 cores and 24 threads at 2.6 GHz with a 135 W TDP. The board uses the C612 chipset and a 12-phase power design on a 12-layer PCB. It targets workstations and render nodes that need high thread counts on a mature platform.
Suitability and alternatives
The dual-socket layout suits multi-threaded workloads such as offline rendering, virtualization hosts and scientific compute. Four-channel DDR4 at 1866/2133/2400 MHz feeds 8 DIMM slots for up to 64 GB per module. Builders who need modern instruction sets, PCIe 4.0 or single-thread speed should consider current platforms instead.
Deciding specification: 8 DDR4 slots
Memory capacity and bandwidth scale with all eight slots populated. The board accepts both ECC and non-ECC DDR4, so registered ECC modules can be used for error correction or standard UDIMMs for lower cost. Populating fewer than eight slots reduces channel count and total bandwidth proportionally.
I korthet
- Dual Xeon E5-2690 V3 processors deliver 24 cores and 24 threads for parallel work
- Eight DDR4 slots support up to 64 GB per module in quad-channel mode
- Two M.2 slots provide NVMe x4 and SATA x4 storage options
- Ten SATA 6 Gb/s ports allow large drive arrays
- 12-layer PCB with 12-phase power feeds dual 135 W CPUs
Specifikationer
| Brand | HUANANZHI |
|---|---|
| Model | X99 F8D PLUS |
| CPU Socket Type | LGA 2011 |
Frågor om den här produkten
Does this board fit a standard E-ATX case and what clearance should I check?
The PCB measures 300 by 320 millimetres E-ATX. Verify your case supports that width and that the 24-pin plus two 8-pin power connectors clear surrounding components.
What memory kits work with the quad-channel controller?
Eight DDR4 slots accept up to 64 gigabytes each at 1866, 2133 or 2400 megahertz. Populate all eight slots in matched sets for full four-channel bandwidth.
Which drives can I attach to the M.2 and SATA ports?
One M.2 22110 slot runs PCIe 3.0 x4 for NVME drives. A second M.2 2280 slot shares an SSATA lane. Six SATA3 and four SSATA3 ports provide ten total 6 gigabit per second connections.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



